check_if_by_snmp output

[Mrutyunjaya Dash]

Hi List,

I just installed the snmp4nagios with all the required libraries. Now
when I am trying to execute the following command, I am getting the
output as below. But according to the document, the output should be
something in different way. I believe there is something wrong. Can
anyone give some idea on this?

./check_if_by_snmp -R /opt/rrdtool/ -T -L -H localhost -i 2 -I eth0
Timeout! Peer = localhost, OID = 1.3.6.1.2.1.2.2.1.7.2

Whereas the output should be in this way as below

OK - eth0: I: 1410937 kO, 12672117 Pkt; O: 1339265 kO, 12722878 Pkt
|'estimated speed'=100000000
'input octets'=1444800491c 'input packets'=12672117c 'input errors'=0c
'output octets'=1371407644c 'output packets'=12722878c 'output
errors'=0c


Regards,
Mrutyunjaya Dash
IT Engineer
Juniper Networks Pvt Ltd.
Bangalore

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20060315/e16c9f43/attachment.html>