Notification Interval Problem
Networks
networks at wi.rr.com
Wed Feb 19 23:31:40 CET 2003
Sorry for not including more info.
Flap-detection is not enabled.
All hosts have service checks. And the service check is working.
Notifications are enabled, and I get notifications when then host state
changes. But I only receive one notification.
The log file shows the host going down and a notification going out.
Once the host is down nagios checks ti see if it is up at regular
intervals.
There are no errors.
I included the service.cfg and nagios.cfg files, I can include the
hosts.cfg file but would need to remove some things from it before
making it public.
Hope this helps,
Josh
On Wed, 2003-02-19 at 16:19, Nagios wrote:
> You have flap_detection enabled what is low_host_flap_threshold and
> high_host_flap_threshold set at in the nagios.cfg file?
>
> Do you have any service checks for this host, as the host will only be
> checked if a service check fails on the host?
>
> Does the tactical overview on the web front end show anything about the
> notifications/checks on the host being disabled because of flap
> detection?
>
> What does the nagios.log show for checks/notifications on this host?
>
> Sorry for not be able to help more but without more info it's not easy.
>
> Tony
>
> > -----Original Message-----
> > From: nagios-users-admin at lists.sourceforge.net [mailto:nagios-users-
> > admin at lists.sourceforge.net] On Behalf Of Networks
> > Sent: 19 February 2003 19:05
> > To: nagios-users at lists.sourceforge.net
> > Subject: [Nagios-users] Notification Interval Problem
> >
> > Hi,
> >
> > I'm having problems with getting nagios to send out more then one
> > notification on an event. My notification_interval is set to 10,
> service
> > check interval is 5, and my interval (in seconds) is set to 60
> > (default). I do receive the first notification, but afterwards no
> other
> > pages or emails are sent out. I want nagios to keep paging until
> someone
> > responds. Is there something I didn't check? I can't seem to get this
> to
> > work. Any help would be appreciated.
> >
> > TIA,
> >
> > josh
> >
> > PS. Here are some clips from host config files:
> >
> > define host{
> > name template
> > notifications_enabled 1
> > event_handler_enabled 1
> > flap_detection_enabled 1
> > process_perf_data 1
> > retain_status_information 1
> > retain_nonstatus_information 1
> > check_command check-host-alive
> > notification_interval 10
> > notification_period 24x7
> > notification_options d,u,r
> > max_check_attempts 4
> > register 0
> > }
> >
> >
> > define host{
> > use template
> > host_name 1st-floor-1
> > alias 1st Floor Stack 1
> > parents passport
> > address 172.16.4.240
> > }
> >
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SlickEdit Inc. Develop an edge.
> > The most comprehensive and flexible code editor you can use.
> > Code faster. C/C++, C#, Java, HTML, XML, many more. FREE 30-Day Trial.
> > www.slickedit.com/sourceforge
> > _______________________________________________
> > Nagios-users mailing list
> > Nagios-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/nagios-users
> > ::: Please include Nagios version, plugin version (-v) and OS when
> reporting any
> > issue.
> > ::: Messages without supporting info will risk being sent to /dev/null
>
-------------- next part --------------
################################################################################
# Sample object config file for Nagios 1.0
#
# Read the documentation for more information on this configuration file. I've
# provided some comments here, but things may not be so clear without further
# explanation, so make sure to read the HTML documentation!
#
# Last Modified: 09-17-2002
#
################################################################################
################################################################################
# SERVICE DEFINITIONS
#
# SYNTAX:
#
################################################################################
# Generic service definition template
define service{
name template
active_checks_enabled 1 ; Active service checks are enabled
passive_checks_enabled 1 ; Passive service checks are enabled/accepted
parallelize_check 1 ; Activ
obsess_over_service 1 ; We should obsess over this serf necessary)
check_freshness 0 ; Default is to NOT check service 'freshness'
notifications_enabled 1 ; Service notifications are enabled
event_handler_enabled 1 ; Service event handler is enabled
flap_detection_enabled 1 ; Flap detection is enabled
process_perf_data 1 ; Process performance data
retain_status_information 1 ; Retain status information acrostarts
is_volatile 0
check_period 24x7
retry_check_interval 1
notification_period 24x7
register 0 ; DONT REGISTER THIS DEFINITION
max_check_attempts 3
normal_check_interval 5
check_command check_ping!200.0,60%!500.0,80%
notification_options c,r
}
define service{
use template ; Name of service template to use
service_description DNS
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options c,r
check_command check_dns
hostgroup_name dns-group
}
define service{
use template ; Name of service template to use
service_description SSH
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options c,r
check_command check_ssh
hostgroup_name ssh-group
}
define service{
use template ; Name of service template to use
service_description WWW
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options c,r
check_command check_http
hostgroup_name www-group
}
define service{
use template ; Name of service template to use
service_description HP Jet Direct
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups printer-contact
notification_interval 120
notification_period 24x7
notification_options n
check_command check_hpjd
hostgroup_name hp-printers
}
define service{
use template ; Name of service template to use
service_description SMTP
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options c,r
check_command check_smtp
hostgroup_name smtp-group
}
define service{
use template ; Name of service template to use
service_description FTP
check_period 24x7
max_check_attempts 3
normal_check_interval 5
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options c,r
check_command check_ftp
hostgroup_name ftp-group
}
# Service definition
define service{
use template ; Name of service template to use
service_description PING Page
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options r,c
check_command check_ping!300.0,80%!500.0,100%
hostgroup_name ping-group
}
define service{
use template ; Name of service template to use
service_description PING NoPage
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups printer-contact
notification_interval 5
notification_period 24x7
notification_options r,c
check_command check_ping!300.0,80%!500.0,100%
hostgroup_name all-printers
}
# Service definition
define service{
use template ; Name of service template to use
service_description WINDOWS SMB
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups linux-admins
notification_interval 120
notification_period 24x7
notification_options r,c
check_command check_smbstatus
hostgroup_name smb-group
}
-------------- next part --------------
##############################################################################
#
# NAGIOS.CFG - Sample Main Config File for Nagios 1.0
#
# Read the documentation for more information on this configuration
# file. I've provided some comments here, but things may not be so
# clear without further explanation.
#
# Last Modified: 07-04-2002
#
##############################################################################
# LOG FILE
# This is the main log file where service and host events are logged
# for historical purposes. This should be the first option specified
# in the config file!!!
log_file=/usr/local/nagios/var/nagios.log
# OBJECT CONFIGURATION FILE(S)
# This is the configuration file in which you define hosts, host
# groups, contacts, contact groups, services, etc. I guess it would
# be better called an object definition file, but for historical
# reasons it isn't. You can split object definitions into several
# different config files by using multiple cfg_file statements here.
# Nagios will read and process all the config files you define.
# This can be very useful if you want to keep command definitions
# separate from host and contact definitions...
# Plugin commands (service and host check commands)
# Arguments are likely to change between different releases of the
# plugins, so you should use the same config file provided with the
# plugin release rather than the one provided with Nagios.
cfg_file=/usr/local/nagios/etc/checkcommands.cfg
# Misc commands (notification and event handler commands, etc)
cfg_file=/usr/local/nagios/etc/misccommands.cfg
# You can split other types of object definitions across several
# config files if you wish (as done here), or keep them all in a
# single config file.
cfg_file=/usr/local/nagios/etc/contactgroups.cfg
cfg_file=/usr/local/nagios/etc/contacts.cfg
cfg_file=/usr/local/nagios/etc/dependencies.cfg
cfg_file=/usr/local/nagios/etc/escalations.cfg
cfg_file=/usr/local/nagios/etc/hostgroups.cfg
cfg_file=/usr/local/nagios/etc/hosts.cfg
cfg_file=/usr/local/nagios/etc/services.cfg
cfg_file=/usr/local/nagios/etc/timeperiods.cfg
# RESOURCE FILE
# This is an optional resource file that contains $USERx$ macro
# definitions. Multiple resource files can be specified by using
# multiple resource_file definitions. The CGIs will not attempt to
# read the contents of resource files, so information that is
# considered to be sensitive (usernames, passwords, etc) can be
# defined as macros in this file and restrictive permissions (600)
# can be placed on this file.
resource_file=/usr/local/nagios/etc/resource.cfg
# STATUS FILE
# This is where the current status of all monitored services and
# hosts is stored. Its contents are read and processed by the CGIs.
# The contentsof the status file are deleted every time Nagios
# restarts.
status_file=/usr/local/nagios/var/status.log
# NAGIOS USER
# This determines the effective user that Nagios should run as.
# You can either supply a username or a UID.
nagios_user=nagios
# NAGIOS GROUP
# This determines the effective group that Nagios should run as.
# You can either supply a group name or a GID.
nagios_group=nagios
# EXTERNAL COMMAND OPTION
# This option allows you to specify whether or not Nagios should check
# for external commands (in the command file defined below). By default
# Nagios will *not* check for external commands, just to be on the
# cautious side. If you want to be able to use the CGI command interface
# you will have to enable this. Setting this value to 0 disables command
# checking (the default), other values enable it.
check_external_commands=1
# EXTERNAL COMMAND CHECK INTERVAL
# This is the interval at which Nagios should check for external commands.
# This value works of the interval_length you specify later. If you leave
# that at its default value of 60 (seconds), a value of 1 here will cause
# Nagios to check for external commands every minute. If you specify a
# number followed by an "s" (i.e. 15s), this will be interpreted to mean
# actual seconds rather than a multiple of the interval_length variable.
# Note: In addition to reading the external command file at regularly
# scheduled intervals, Nagios will also check for external commands after
# event handlers are executed.
# NOTE: Setting this value to -1 causes Nagios to check the external
# command file as often as possible.
#command_check_interval=1
#command_check_interval=15s
command_check_interval=-1
# EXTERNAL COMMAND FILE
# This is the file that Nagios checks for external command requests.
# It is also where the command CGI will write commands that are submitted
# by users, so it must be writeable by the user that the web server
# is running as (usually 'nobody'). Permissions should be set at the
# directory level instead of on the file, as the file is deleted every
# time its contents are processed.
command_file=/usr/local/nagios/var/rw/nagios.cmd
# COMMENT FILE
# This is the file that Nagios will use for storing host and service
# comments.
comment_file=/usr/local/nagios/var/comment.log
# DOWNTIME FILE
# This is the file that Nagios will use for storing host and service
# downtime data.
downtime_file=/usr/local/nagios/var/downtime.log
# LOCK FILE
# This is the lockfile that Nagios will use to store its PID number
# in when it is running in daemon mode.
lock_file=/usr/local/nagios/var/nagios.lock
# TEMP FILE
# This is a temporary file that is used as scratch space when Nagios
# updates the status log, cleans the comment file, etc. This file
# is created, used, and deleted throughout the time that Nagios is
# running.
temp_file=/usr/local/nagios/var/nagios.tmp
# LOG ROTATION METHOD
# This is the log rotation method that Nagios should use to rotate
# the main log file. Values are as follows..
# n = None - don't rotate the log
# h = Hourly rotation (top of the hour)
# d = Daily rotation (midnight every day)
# w = Weekly rotation (midnight on Saturday evening)
# m = Monthly rotation (midnight last day of month)
log_rotation_method=d
# LOG ARCHIVE PATH
# This is the directory where archived (rotated) log files should be
# placed (assuming you've chosen to do log rotation).
log_archive_path=/usr/local/nagios/var/archives
# LOGGING OPTIONS
# If you want messages logged to the syslog facility, as well as the
# NetAlarm log file set this option to 1. If not, set it to 0.
use_syslog=1
# NOTIFICATION LOGGING OPTION
# If you don't want notifications to be logged, set this value to 0.
# If notifications should be logged, set the value to 1.
log_notifications=1
# SERVICE RETRY LOGGING OPTION
# If you don't want service check retries to be logged, set this value
# to 0. If retries should be logged, set the value to 1.
log_service_retries=1
# HOST RETRY LOGGING OPTION
# If you don't want host check retries to be logged, set this value to
# 0. If retries should be logged, set the value to 1.
log_host_retries=1
# EVENT HANDLER LOGGING OPTION
# If you don't want host and service event handlers to be logged, set
# this value to 0. If event handlers should be logged, set the value
# to 1.
log_event_handlers=1
# INITIAL STATES LOGGING OPTION
# If you want Nagios to log all initial host and service states to
# the main log file (the first time the service or host is checked)
# you can enable this option by setting this value to 1. If you
# are not using an external application that does long term state
# statistics reporting, you do not need to enable this option. In
# this case, set the value to 0.
log_initial_states=0
# EXTERNAL COMMANDS LOGGING OPTION
# If you don't want Nagios to log external commands, set this value
# to 0. If external commands should be logged, set this value to 1.
# Note: This option does not include logging of passive service
# checks - see the option below for controlling whether or not
# passive checks are logged.
log_external_commands=1
# PASSIVE SERVICE CHECKS LOGGING OPTION
# If you don't want Nagios to log passive service checks, set this
# value to 0. If passive service checks should be logged, set this
# value to 1.
log_passive_service_checks=1
# GLOBAL HOST AND SERVICE EVENT HANDLERS
# These options allow you to specify a host and service event handler
# command that is to be run for every host or service state change.
# The global event handler is executed immediately prior to the event
# handler that you have optionally specified in each host or
# service definition. The command argument is the short name of a
# command definition that you define in your host configuration file.
# Read the HTML docs for more information.
#global_host_event_handler=somecommand
#global_service_event_handler=somecommand
# INTER-CHECK DELAY METHOD
# This is the method that Nagios should use when initially
# "spreading out" service checks when it starts monitoring. The
# default is to use smart delay calculation, which will try to
# space all service checks out evenly to minimize CPU load.
# Using the dumb setting will cause all checks to be scheduled
# at the same time (with no delay between them)! This is not a
# good thing for production, but is useful when testing the
# parallelization functionality.
# n = None - don't use any delay between checks
# d = Use a "dumb" delay of 1 second between checks
# s = Use "smart" inter-check delay calculation
# x.xx = Use an inter-check delay of x.xx seconds
inter_check_delay_method=s
# SERVICE CHECK INTERLEAVE FACTOR
# This variable determines how service checks are interleaved.
# Interleaving the service checks allows for a more even
# distribution of service checks and reduced load on remote
# hosts. Setting this value to 1 is equivalent to how versions
# of Nagios previous to 0.0.5 did service checks. Set this
# value to s (smart) for automatic calculation of the interleave
# factor unless you have a specific reason to change it.
# s = Use "smart" interleave factor calculation
# x = Use an interleave factor of x, where x is a
# number greater than or equal to 1.
service_interleave_factor=s
# MAXIMUM CONCURRENT SERVICE CHECKS
# This option allows you to specify the maximum number of
# service checks that can be run in parallel at any given time.
# Specifying a value of 1 for this variable essentially prevents
# any service checks from being parallelized. A value of 0
# will not restrict the number of concurrent checks that are
# being executed.
max_concurrent_checks=0
# SERVICE CHECK REAPER FREQUENCY
# This is the frequency (in seconds!) that Nagios will process
# the results of services that have been checked.
service_reaper_frequency=5
# SLEEP TIME
# This is the number of seconds to sleep between checking for system
# events and service checks that need to be run. I would recommend
# *not* changing this from its default value of 1 second.
sleep_time=1
# TIMEOUT VALUES
# These options control how much time Nagios will allow various
# types of commands to execute before killing them off. Options
# are available for controlling maximum time allotted for
# service checks, host checks, event handlers, notifications, the
# ocsp command, and performance data commands. All values are in
# seconds.
service_check_timeout=30
host_check_timeout=15
event_handler_timeout=30
notification_timeout=30
ocsp_timeout=5
perfdata_timeout=5
# RETAIN STATE INFORMATION
# This setting determines whether or not Nagios will save state
# information for services and hosts before it shuts down. Upon
# startup Nagios will reload all saved service and host state
# information before starting to monitor. This is useful for
# maintaining long-term data on state statistics, etc, but will
# slow Nagios down a bit when it (re)starts. Since its only
# a one-time penalty, I think its well worth the additional
# startup delay.
retain_state_information=1
# STATE RETENTION FILE
# This is the file that Nagios should use to store host and
# service state information before it shuts down. The state
# information in this file is also read immediately prior to
# starting to monitor the network when Nagios is restarted.
# This file is used only if the preserve_state_information
# variable is set to 1.
state_retention_file=/usr/local/nagios/var/status.sav
# RETENTION DATA UPDATE INTERVAL
# This setting determines how often (in minutes) that Nagios
# will automatically save retention data during normal operation.
# If you set this value to 0, Nagios will not save retention
# data at regular interval, but it will still save retention
# data before shutting down or restarting. If you have disabled
# state retention, this option has no effect.
retention_update_interval=60
# USE RETAINED PROGRAM STATE
# This setting determines whether or not Nagios will set
# program status variables based on the values saved in the
# retention file. If you want to use retained program status
# information, set this value to 1. If not, set this value
# to 0.
use_retained_program_state=0
# INTERVAL LENGTH
# This is the seconds per unit interval as used in the
# host/contact/service configuration files. Setting this to 60 means
# that each interval is one minute long (60 seconds). Other settings
# have not been tested much, so your mileage is likely to vary...
interval_length=60
# AGRESSIVE HOST CHECKING OPTION
# If you don't want to turn on agressive host checking features, set
# this value to 0 (the default). Otherwise set this value to 1 to
# enable the agressive check option. Read the docs for more info
# on what agressive host check is or check out the source code in
# base/checks.c
use_agressive_host_checking=1
# SERVICE CHECK EXECUTION OPTION
# This determines whether or not Nagios will actively execute
# service checks when it initially starts. If this option is
# disabled, checks are not actively made, but Nagios can still
# receive and process passive check results that come in. Unless
# you're implementing redundant hosts or have a special need for
# disabling the execution of service checks, leave this enabled!
# Values: 1 = enable checks, 0 = disable checks
execute_service_checks=1
# PASSIVE CHECK ACCEPTANCE OPTION
# This determines whether or not Nagios will accept passive
# service checks results when it initially (re)starts.
# Values: 1 = accept passive checks, 0 = reject passive checks
accept_passive_service_checks=1
# NOTIFICATIONS OPTION
# This determines whether or not Nagios will sent out any host or
# service notifications when it is initially (re)started.
# Values: 1 = enable notifications, 0 = disable notifications
enable_notifications=1
# EVENT HANDLER USE OPTION
# This determines whether or not Nagios will run any host or
# service event handlers when it is initially (re)started. Unless
# you're implementing redundant hosts, leave this option enabled.
# Values: 1 = enable event handlers, 0 = disable event handlers
enable_event_handlers=1
# PROCESS PERFORMANCE DATA OPTION
# This determines whether or not Nagios will process performance
# data returned from service and host checks. If this option is
# enabled, host performance data will be processed using the
# host_perfdata_command (defined below) and service performance
# data will be processed using the service_perfdata_command (also
# defined below). Read the HTML docs for more information on
# performance data.
# Values: 1 = process performance data, 0 = do not process performance data
process_performance_data=0
# HOST AND SERVICE PERFORMANCE DATA PROCESSING COMMANDS
# These commands are run after every host and service check is
# performed. These commands are executed only if the
# enable_performance_data option (above) is set to 1. The command
# argument is the short name of a command definition that you
# define in your host configuration file. Read the HTML docs for
# more information on performance data.
#host_perfdata_command=process-host-perfdata
#service_perfdata_command=process-service-perfdata
# OBSESS OVER SERVICE CHECKS OPTION
# This determines whether or not Nagios will obsess over service
# checks and run the ocsp_command defined below. Unless you're
# planning on implementing distributed monitoring, do not enable
# this option. Read the HTML docs for more information on
# implementing distributed monitoring.
# Values: 1 = obsess over services, 0 = do not obsess (default)
obsess_over_services=0
# OBSESSIVE COMPULSIVE SERVICE PROCESSOR COMMAND
# This is the command that is run for every service check that is
# processed by Nagios. This command is executed only if the
# obsess_over_service option (above) is set to 1. The command
# argument is the short name of a command definition that you
# define in your host configuration file. Read the HTML docs for
# more information on implementing distributed monitoring.
#ocsp_command=somecommand
# ORPHANED SERVICE CHECK OPTION
# This determines whether or not Nagios will periodically
# check for orphaned services. Since service checks are not
# rescheduled until the results of their previous execution
# instance are processed, there exists a possibility that some
# checks may never get rescheduled. This seems to be a rare
# problem and should not happen under normal circumstances.
# If you have problems with service checks never getting
# rescheduled, you might want to try enabling this option.
# Values: 1 = enable checks, 0 = disable checks
check_for_orphaned_services=0
# SERVICE FRESHNESS CHECK OPTION
# This option determines whether or not Nagios will periodically
# check the "freshness" of service results. Enabling this option
# is useful for ensuring passive checks are received in a timely
# manner.
# Values: 1 = enabled freshness checking, 0 = disable freshness checking
check_service_freshness=1
# FRESHNESS CHECK INTERVAL
# This setting determines how often (in seconds) Nagios will
# check the "freshness" of service check results. If you have
# disabled service freshness checking, this option has no effect.
freshness_check_interval=60
# AGGREGATED STATUS UPDATES
# This option determines whether or not Nagios will
# aggregate updates of host, service, and program status
# data. Normally, status data is updated immediately when
# a change occurs. This can result in high CPU loads if
# you are monitoring a lot of services. If you want Nagios
# to only refresh status data every few seconds, disable
# this option.
# Values: 1 = enable aggregate updates, 0 = disable aggregate updates
aggregate_status_updates=1
# AGGREGATED STATUS UPDATE INTERVAL
# Combined with the aggregate_status_updates option,
# this option determines the frequency (in seconds!) that
# Nagios will periodically dump program, host, and
# service status data. If you are not using aggregated
# status data updates, this option has no effect.
status_update_interval=15
# FLAP DETECTION OPTION
# This option determines whether or not Nagios will try
# and detect hosts and services that are "flapping".
# Flapping occurs when a host or service changes between
# states too frequently. When Nagios detects that a
# host or service is flapping, it will temporarily supress
# notifications for that host/service until it stops
# flapping. Flap detection is very experimental, so read
# the HTML documentation before enabling this feature!
# Values: 1 = enable flap detection
# 0 = disable flap detection (default)
enable_flap_detection=0
# FLAP DETECTION THRESHOLDS FOR HOSTS AND SERVICES
# Read the HTML documentation on flap detection for
# an explanation of what this option does. This option
# has no effect if flap detection is disabled.
low_service_flap_threshold=5.0
high_service_flap_threshold=20.0
low_host_flap_threshold=5.0
high_host_flap_threshold=20.0
# DATE FORMAT OPTION
# This option determines how short dates are displayed. Valid options
# include:
# us (MM-DD-YYYY HH:MM:SS)
# euro (DD-MM-YYYY HH:MM:SS)
# iso8601 (YYYY-MM-DD HH:MM:SS)
# strict-iso8601 (YYYY-MM-DDTHH:MM:SS)
#
date_format=us
# ILLEGAL OBJECT NAME CHARACTERS
# This options allows you to specify illegal characters that cannot
# be used in host names, service descriptions, or names of other
# object types.
illegal_object_name_chars=`~!$%^&*|'"<>?,()=
# ILLEGAL MACRO OUTPUT CHARACTERS
# This options allows you to specify illegal characters that are
# stripped from macros before being used in notifications, event
# handlers, etc. This DOES NOT affect macros used in service or
# host check commands.
# The following macros are stripped of the characters you specify:
# $OUTPUT$, $PERFDATA$
illegal_macro_output_chars=`~$&|'"<>
# ADMINISTRATOR EMAIL ADDRESS
# The email address of the administrator of *this* machine (the one
# doing the monitoring). Nagios never uses this value itself, but
# you can access this value by using the $ADMINEMAIL$ macro in your
# notification commands.
admin_email=nagios
# ADMINISTRATOR PAGER NUMBER/ADDRESS
# The pager number/address for the administrator of *this* machine.
# Nagios never uses this value itself, but you can access this
# value by using the $ADMINPAGER$ macro in your notification
# commands.
admin_pager=jrobinett at starkinvestments.com
# EOF (End of file)
More information about the Users
mailing list