Problem installing Nagios 3.3.1 with --enable-embedded-per in CentOS 6 64 bits

KRAFT Benjamin benj at dotnul.com
Wed Oct 19 14:08:06 CEST 2011
Previous message: Monitoring clamd.amavisd
Next message: AUTO: Eliot Picken is out of the office (returning 03/11/2011)
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Hi,

I had a similar problem on a centos6/64bits platform, but the
./configure showed me the following :

Can't locate ExtUtils/Embed.pm in @INC (@INC contains:
/usr/local/lib64/perl5 /usr/local/share/perl5
/usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl
/usr/lib64/perl5 /usr/share/perl5 .).
BEGIN failed--compilation aborted.

I then just installed perl-ExtUtils-Embed and ruled out the problem.

hope it helps.

Regards,

Benjamin

On Wed, Sep 14, 2011 at 7:22 AM, xesos <xesos at free.fr> wrote:
> Hello,
>
> Yes perl-devel is installed :
>
> - yum install httpd php gcc make gd gd-devel perl perl-devel wget mailx
>
> Thanks,
>
> Regards.
>
> Le 13/09/2011 23:53, Werner, Robert a écrit :
>
> One quick guess:  do you have the perl-devel rpm installed?
>
> --
> Robert G. Werner
> Oracle Apps Systems Administrator
> rwerner at pomwonderful.com
> 559.521.5089
>
>
> -----Original Message-----
> From: xesos [mailto:xesos at free.fr]
> Sent: Tuesday, September 13, 2011 12:37 PM
> To: nagios-users at lists.sourceforge.net
> Subject: [Nagios-users] Problem installing Nagios 3.3.1 with
> --enable-embedded-per in CentOS 6 64 bits
>
> Hello,
>
> I can not compile Nagios with --enable-embedded-perl in CentOS 6 64
> bits. The system is installed by default (minimal installation).
> Here, it's all my procedure and the errors :
>
> - yum install httpd php gcc make gd gd-devel perl perl-devel wget mailx
>
> - groupadd nagios
> - useradd -g nagios -d /usr/local/nagios -M -s /bin/bash nagios
>
> - groupadd nagcmd
> - usermod -a -G nagcmd nagios
> - usermod -a -G nagcmd apache
>
> - cd /usr/local/src/
> - wget
> http://downloads.sourceforge.net/project/nagios/nagios-3.x/nagios-3.3.1/nagios-3.3.1.tar.gz?r=http%3A%2F%2Fwww.nagios.org%2Fdownload%2Fcore%2Fthanks%2F&ts=1315941098&use_mirror=freefr
> - tar -xzf nagios-3.3.1.tar.gz
> - cd nagios
> - ./configure --prefix=/usr/local/nagios --sysconfdir=/etc/nagios
> --localstatedir=/var/nagios --with-nagios-user=nagios
> --with-nagios-grp=nagios --with-command-user=nagios
> --with-command-group=nagcmd --with-gd-lib=/usr/local/lib
> --with-gd-inc=/usr/local/include --with-cgiurl=/nagios/cgi-bin
> --with-htmurl=/nagios --with-mail=/bin/mail
> --with-httpd-conf=/etc/httpd/conf.d --enable-nanosleep
> --enable-embedded-perl --with-perlcache
> - make all
>
>  > cd ./base && make
>  > make[1]: entrant dans le rÃ©pertoire Â« /usr/local/src/nagios/base Â»
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> broker.o broker.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> nebmods.o nebmods.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> ../common/shared.o ../common/shared.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> checks.o checks.c
>  > Dans le fichier inclus Ã partir de checks.c:41:
>  > ../include/epn_nagios.h:11:20: erreur: EXTERN.h : Aucun fichier ou
> dossier de ce type
>  > ../include/epn_nagios.h:12:18: erreur: perl.h : Aucun fichier ou
> dossier de ce type
>  > In file included from checks.c:41:
>  > ../include/epn_nagios.h:31: erreur: expected â=â, â,â, â;â, âasmâ or
> â__attribute__â before âvoidâ
>  > checks.c: In function ârun_async_service_checkâ:
>  > checks.c:348: erreur: âSVâ undeclared (first use in this function)
>  > checks.c:348: erreur: (Each undeclared identifier is reported only once
>  > checks.c:348: erreur: for each function it appears in.)
>  > checks.c:348: erreur: âplugin_hndlr_crâ undeclared (first use in this
> function)
>  > checks.c:354: erreur: âdSPâ undeclared (first use in this function)
>  > checks.c:551: erreur: âENTERâ undeclared (first use in this function)
>  > checks.c:552: erreur: âSAVETMPSâ undeclared (first use in this function)
>  > checks.c:553: attention : implicit declaration of function âPUSHMARKâ
>  > checks.c:553: erreur: âSPâ undeclared (first use in this function)
>  > checks.c:554: attention : implicit declaration of function âXPUSHsâ
>  > checks.c:554: attention : implicit declaration of function âsv_2mortalâ
>  > checks.c:554: attention : implicit declaration of function ânewSVpvâ
>  > checks.c:558: erreur: âPUTBACKâ undeclared (first use in this function)
>  > checks.c:562: attention : implicit declaration of function âcall_pvâ
>  > checks.c:562: erreur: âG_SCALARâ undeclared (first use in this function)
>  > checks.c:562: erreur: âG_EVALâ undeclared (first use in this function)
>  > checks.c:564: erreur: âSPAGAINâ undeclared (first use in this function)
>  > checks.c:566: attention : implicit declaration of function âSvTRUEâ
>  > checks.c:566: erreur: âERRSVâ undeclared (first use in this function)
>  > checks.c:575: erreur: âPOPsâ undeclared (first use in this function)
>  > checks.c:578: attention : implicit declaration of function âSvPVXâ
>  > checks.c:623: attention : implicit declaration of function ânewSVsvâ
>  > checks.c:628: erreur: âFREETMPSâ undeclared (first use in this function)
>  > checks.c:629: erreur: âLEAVEâ undeclared (first use in this function)
>  > checks.c:707: erreur: âG_ARRAYâ undeclared (first use in this function)
>  > checks.c:711: erreur: âPOPpxâ undeclared (first use in this function)
>  > checks.c:712: erreur: âPOPiâ undeclared (first use in this function)
>  > make[1]: *** [checks.o] Erreur 1
>  > make[1]: quittant le rÃ©pertoire Â« /usr/local/src/nagios/base Â»
>  > make: *** [all] Erreur 2
>
> - yum install mlocate
> - updatedb
> - locate EXTERN.h
>
>  > /usr/lib64/perl5/CORE/EXTERN.h
>
> - locate perl.h
>
>  > /usr/lib64/perl5/CORE/perl.h
>
> - export CPPFLAGS="-I/usr/lib64/perl5/CORE/"
> - make all
>
>  > cd ./base && make
>  > make[1]: entrant dans le rÃ©pertoire Â« /usr/local/src/nagios/base Â»
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o broker.o broker.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o nebmods.o nebmods.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> ../common/shared.o ../common/shared.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o checks.o checks.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o config.o config.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o commands.o commands.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o events.o events.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o flapping.o flapping.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o logging.o logging.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> macros-base.o ../common/macros.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o netutils.o netutils.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o notifications.o notifications.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o sehandlers.o sehandlers.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> skiplist.o ../common/skiplist.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE
> -I/usr/lib64/perl5/CORE/ -c -o utils.o utils.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> retention-base.o sretention.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xretention-base.o ../xdata/xrddefault.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> comments-base.o ../common/comments.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xcomments-base.o ../xdata/xcddefault.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> objects-base.o ../common/objects.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xobjects-base.o ../xdata/xodtemplate.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> statusdata-base.o ../common/statusdata.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xstatusdata-base.o ../xdata/xsddefault.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> perfdata-base.o perfdata.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xperfdata-base.o ../xdata/xpddefault.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> downtime-base.o ../common/downtime.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -c -o
> xdowntime-base.o ../xdata/xdddefault.c
>  > gcc -Wall -g -O2 -I/usr/local/include -DHAVE_CONFIG_H -DNSCORE -o
> nagios nagios.c broker.o nebmods.o ../common/shared.o checks.o config.o
> commands.o events.o flapping.o logging.o macros-base.o netutils.o
> notifications.o sehandlers.o skiplist.o utils.o retention-base.o
> xretention-base.o comments-base.o xcomments-base.o objects-base.o
> xobjects-base.o statusdata-base.o xstatusdata-base.o perfdata-base.o
> xperfdata-base.o downtime-base.o xdowntime-base.o perlxsi.o
> -Wl,-export-dynamic -L/usr/local/lib -lm -lpthread -ldl
>  > gcc: perlxsi.o : Aucun fichier ou dossier de ce type
>  > make[1]: *** [nagios] Erreur 1
>  > make[1]: quittant le rÃ©pertoire Â« /usr/local/src/nagios/base Â»
>  > make: *** [all] Erreur 2
>
> An idea of the problem ?
>
> Thanks,
>
> Regards.
>
>
> ------------------------------------------------------------------------------
> BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
> Learn about the latest advances in developing for the
> BlackBerry® mobile platform with sessions, labs & more.
> See new tools and technologies. Register for BlackBerry® DevCon today!
> http://p.sf.net/sfu/rim-devcon-copy1
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting
> any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
> ------------------------------------------------------------------------------
> BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
> Learn about the latest advances in developing for the
> BlackBerry® mobile platform with sessions, labs & more.
> See new tools and technologies. Register for BlackBerry® DevCon today!
> http://p.sf.net/sfu/rim-devcon-copy1
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting
> any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
> ------------------------------------------------------------------------------
> BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
> Learn about the latest advances in developing for the
> BlackBerry® mobile platform with sessions, labs & more.
> See new tools and technologies. Register for BlackBerry® DevCon today!
> http://p.sf.net/sfu/rim-devcon-copy1
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting
> any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>

------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null
Previous message: Monitoring clamd.amavisd
Next message: AUTO: Eliot Picken is out of the office (returning 03/11/2011)
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Users mailing list