Bug in check_openmanage ?

rbn31 at free.fr rbn31 at free.fr
Thu Sep 23 10:12:08 CEST 2010


Hello,

I am a newbie ... This is my first post.

Following to a DELL firmware update 1.X to 2.3.3, a strange "error" message
appears :

    System:      PowerEdge M805
   ServiceTag:  ???????                  OMSA version:    6.3.0
   BIOS/date:   2.3.3 04/16/2010         Plugin version:  3.6.0
-----------------------------------------------------------------------------
   Storage Components
=============================================================================
  STATE  |    ID    |  MESSAGE TEXT
---------+----------+--------------------------------------------------------
      OK |        0 | Controller 0 [CERC 6/i Integrated] is Ready
      OK |  0:0:0:0 | Physical Disk 0:0:0 [SAS-HDD 146GB] on ctrl 0 is Online
      OK |  0:0:0:1 | Physical Disk 0:0:1 [SAS-HDD 146GB] on ctrl 0 is Online
      OK |      0:0 | Logical Drive '/dev/sda' [RAID-1, 136.13 GB] is Ready
      OK |      0:0 | Connector 0 [SAS Port RAID Mode] on controller 0 is Ready
      OK |    0:0:0 | Enclosure 0:0:0 [Backplane] on controller 0 is Ready
-----------------------------------------------------------------------------
   Chassis Components
=============================================================================
  STATE  |  ID  |  MESSAGE TEXT
---------+------+------------------------------------------------------------
      OK |    0 | Memory module 0 [DIMM_A1, 2048 MB] is Ok
      OK |    1 | Memory module 1 [DIMM_A2, 2048 MB] is Ok
      OK |    2 | Memory module 2 [DIMM_A3, 2048 MB] is Ok
      OK |    3 | Memory module 3 [DIMM_A4, 2048 MB] is Ok
      OK |    4 | Memory module 4 [DIMM_B1, 2048 MB] is Ok
      OK |    5 | Memory module 5 [DIMM_B2, 2048 MB] is Ok
      OK |    6 | Memory module 6 [DIMM_B3, 2048 MB] is Ok
      OK |    7 | Memory module 7 [DIMM_B4, 2048 MB] is Ok
      OK |    0 | Temperature Probe 0 [System Board Ambient Temp] reads 17 C
(min=8/3, max=42/47)
      OK |    0 | Processor 0 [Quad-Core AMD Opteron 2384] is Present
      OK |    1 | Processor 1 [Quad-Core AMD Opteron 2384] is Present
      OK |    0 | Voltage sensor 0 [CPU1 VCORE] is Good
      OK |    1 | Voltage sensor 1 [CPU2 VCORE] is Good
      OK |    2 | Voltage sensor 2 [CPU1 VTT PG] is Good
      OK |    3 | Voltage sensor 3 [CPU2 VTT PG] is Good
      OK |    4 | Voltage sensor 4 [CPU1 2.5V PG] is Good
      OK |    5 | Voltage sensor 5 [CPU2 2.5V PG] is Good
      OK |    6 | Voltage sensor 6 [CPU1 1.8V PG] is Good
      OK |    7 | Voltage sensor 7 [CPU2 1.8V PG] is Good
      OK |    8 | Voltage sensor 8 [System Board 3.3V PG] is Good
      OK |    9 | Voltage sensor 9 [System Board 5V PG] is Good
      OK |   10 | Voltage sensor 10 [System Board 12V PG] is Good
      OK |   11 | Voltage sensor 11 [System Board 1.2V AUX PG] is Good
      OK |   12 | Voltage sensor 12 [System Board 1.2V LDT PG] is Good
      OK |   13 | Voltage sensor 13 [System Board CPU Power Fault] is Good
      OK |   14 | Voltage sensor 14 [System Board VCORE MCP PG] is Good
      OK |   15 | Voltage sensor 15 [System Board PVCC PG] is Good
      OK |   16 | Voltage sensor 16 [System Board 1.0V MGMT PG] is Good
      OK |   17 | Voltage sensor 17 [MEZZ2_FAB_B PG] is Good
      OK |   18 | Voltage sensor 18 [MEZZ1_FAB_C PG] is Good
      OK |   19 | Voltage sensor 19 [Storage PG] is Good
      OK |    0 | Battery probe 0 [System Board CMOS Battery] is Good
      OK |    1 | Amperage probe 1 [System Board System Level] reads 140 W
-----------------------------------------------------------------------------
   Other messages
=============================================================================
  STATE  |  MESSAGE TEXT
---------+-------------------------------------------------------------------
      OK | Alert log content: 0 critical, 0 non-critical, 1 ok
      OK | ESM log content: 0 critical, 0 non-critical, 1 ok
      OK | ESM log health is Ok (less than 80% full)
OOPS! Something is wrong with this server, but I don't know what. The global
system health status is CRITICAL, but every component check is OK. This may be a
bug in the Nagios plugin, please file a bug report.

The status change from OK to Unknown...

Is anybody can help me to debbug ?

Thanks for your helps.

Rémi
--

------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list