FreeBSD Nagios 2.12

Andrew D andrewd at webzone.net.au
Sat Jun 21 17:29:56 CEST 2008


Marc Powell wrote:
> On Jun 19, 2008, at 11:31 PM, Andrew D (Webzone) wrote:
> 
>> Hi,
>>
>> Now the first server has stopped probing.
> 
> I would verify that the service check time_periods, check_intervals  
> make sense and that active checks are enabled both at the service  
> level and globally via the web interface.
> 


Tactical overview says
# Active Host / Service Checks:	13 / 16

Services
0 Critical 	0 Warning 	0 Unknown 	0 Ok 	16 Pending


Monitoring Features
Flap Detection 	Notifications 	Event Handlers 	Active Checks 	Passive Checks
Flap Detection Disabled 	  	N/A
	
Notifications Enabled 	  	
All Services Enabled
All Hosts Enabled
	
Event Handlers Enabled 	  	
All Services Enabled
All Hosts Enabled
	
Active Checks Enabled 	  	
All Services Enabled
All Hosts Enabled
	
Passive Checks Enabled 	  	
All Services Enabled
All Hosts Enabled

> If you use state retention, try stopping nagios, moving the retention  
> file out of the way, globally disabling retention in nagios.cfg and  
> restarting.
> 

I set  retain_state_information=0 in nagios.cfg, moved the file and
rebooted.


Web page shows the following.

dns1 DNS check
PENDING 	N/A 	0d 0h 10m 28s+ 	1/3 	Service check scheduled for Sat Jun
21 01:10:07 CST 2008

dns2 DNS check
PENDING 	N/A 	0d 0h 10m 28s+ 	1/3 	Service check scheduled for Sat Jun
21 01:11:37 CST 2008

The time here (at the time) is Sat Jun 21 01:20 CST 2008

> If you continue to have issues, recompile nagios with debug enabled  
> and run with that.
> 
I set  --enable-DEBUGALL

and got the following upon starting of nagios.


*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:55 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
check_for_external_commands() start
check_for_external_commands() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 6 (orphaned service check)
check_for_orphaned_services() start
check_for_orphaned_services() end
handle_timed_event() end
reschedule_event() start
add_event() start
add_event() end
reschedule_event() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 10 (service result freshness check)
check_service_result_freshness() start
check_service_result_freshness() end
handle_timed_event() end
reschedule_event() start
add_event() start
add_event() end
reschedule_event() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 1 (external command check)
check_for_external_commands() start
check_for_external_commands() end
handle_timed_event() end
reschedule_event() start
add_event() start
add_event() end
reschedule_event() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 8 (status save)
handle_timed_event() end
reschedule_event() start
add_event() start
add_event() end
reschedule_event() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:30:56 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 5 (service check reaper)
reap_service_checks() start
Starting to reap service check results...
read_svc_message() start
read_svc_message() end
Finished reaping service check results.
reap_service_checks() end
handle_timed_event() end
reschedule_event() start
add_event() start
add_event() end
reschedule_event() end

*** Event Check Loop ***
         Current time: Sat Jun 21 02:30:56 2008
         Next High Priority Event Time: Sat Jun 21 02:31:06 2008
         Next Low Priority Event Time:  Sat Jun 21 02:30:56 2008
Current/Max Outstanding Service Checks: 0/0
handle_timed_event() start
*** Event Details ***
         Event time: Sat Jun 21 02:30:56 2008
         Event type: 0 (service check)
                 Service Description: DNS check
                 Associated Host:     dns1
check_time_against_period() start
find_timeperiod() start
check_service_dependencies() start
check_service_dependencies() end
find_host() start
         Checking service 'DNS check' on host 'dns1'...
clear_volatile_macros() start
clear_argv_macros() start
clear_argv_macros() end
clear_volatile_macros() end
grab_host_macros() start
find_hostextinfo() start
grab_datetime_macros() start
grab_datetime_macros() end
grab_host_macros() end
grab_service_macros() start
find_serviceextinfo() start
grab_datetime_macros() start
grab_datetime_macros() end
grab_service_macros() end
grab_summary_macros() start
grab_summary_macros() end
get_raw_command_line() start
         Input: check_dns
clear_argv_macros() start
clear_argv_macros() end
find_command() start
         Output: $USER1$/check_dns -H www.yahoo.com -s $HOSTADDRESS$
get_raw_command_line() end
process_macros() start
process_macros() end



And thats where it stops and locks.

Executing from the command line returns the following.

support# /usr/local/libexec/nagios/check_dns -H www.yahoo.com -s 210.8.36.2

DNS OK: 0.417 seconds response time. www.yahoo.com returns
209.131.36.158|time=0.417421s;;;0.000000

If I hash out that service, the next service listed does the same thing.

I hope that helps,
Cheers
cya
Andrew

> --
> Marc
> 
> -------------------------------------------------------------------------
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
> ::: Messages without supporting info will risk being sent to /dev/null




-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list