check_snmp_int.pl regex problems

[Jason Woodward]

Hi Dan,

Thanks for the suggestion.  That did not work, it still doesn't like the 
$.  I have gone ahead and modified one of the check_snmp scripts to 
check it based on each interfaces oid.  I can get the info I need now, 
just takes a bit more work.

Jason

_________________________________ 

Dan Eriksson wrote:
> Hi Jason,
>
> According to this,
> http://www.mail-archive.com/nagios-users@lists.sourceforge.net/msg02698.html
>
> It seems like you need to put single quotes instead of double quotes like,
> as you want to match on "Intel(R) PRO/1000 MT Network Connection" and only this.
>
> Then I guess your check_command should look something like:
>
> /check_command check_snmp_int!'PRO/1000 MT Network Connection$'
>
> Hope this helps,
>
> Best regards,
> Dan
>
> -----Ursprungligt meddelande-----
> Från: nagios-users-bounces at lists.sourceforge.net [mailto:nagios-users-bounces at lists.sourceforge.net] För Jason Woodward
> Skickat: den 26 juni 2007 16:08
> Till: nagios-users at lists.sourceforge.net
> Ämne: [Nagios-users] check_snmp_int.pl regex problems
>
> I have 2 interfaces:
>
> Intel(R) PRO/1000 MT Network Connection
> Intel(R) PRO/1000 MT Network Connection #2
>
>
> I need to filter out " Intel(R) PRO/1000 MT Network Connection #2" . The 
> following are some of the commands I have tried.
>
> /check_command check_snmp_int!""
> MS TCP Loopback interface:UP, Intel(R) PRO/1000 MT Network Connection 
> #2:DOWN, Intel(R) PRO/1000 MT Network Connection:UP: 1 int NOK : CRITICAL/
>
> this cuts out anything that matches MT, so I know that if I cut out any 
> interface with #, I will get what I want
> /check_command check_snmp_int!"^[MT]"
> MS TCP Loopback interface:UP:1 UP: OK/
>
> But # doesn't work...
> /check_command check_snmp_int!"^[#]"
> ERROR : Unknown interface ^[#]/
>
> maybe if I cut out any interface with 2 in it?
> /check_command check_snmp_int!"^[2]"
> ERROR : Unknown interface ^[2]/
>
> this doesn't cut out anything that matches Intel, I assume something to 
> do with the /
> /check_command check_snmp_int!"^[Intel]"
> Intel(R) PRO/1000 MT Network Connection #2:DOWN, Intel(R) PRO/1000 MT 
> Network Connection:UP: 1 int NOK : CRITICAL/
>
> I can isolate "Intel(R) PRO/1000 MT Network Connection #2"
> /check_command check_snmp_int!"#2"
> Intel(R) PRO/1000 MT Network Connection #2:DOWN: 1 int NOK : CRITICAL/
>
> /check_command check_snmp_int!"Intel(R) PRO/1000 MT Network Connection"
> ERROR : Unknown interface Intel(R) PRO/1000 MT Network Connection/
>
> /check_command check_snmp_int!"1000 MT Network Connection"
> Intel(R) PRO/1000 MT Network Connection #2:DOWN, Intel(R) PRO/1000 MT 
> Network Connection:UP: 1 int NOK : CRITICAL /
>
>
> I can use "^Intel" to get Intel at the beginning
> /check_command check_snmp_int!"^Intel"
> Intel(R) PRO/1000 MT Network Connection #2:DOWN, Intel(R) PRO/1000 MT 
> Network Connection:UP: 1 int NOK : CRITICAL/
>
> Since ^ works, I figured $ would work as well. $ does not seem to work 
> to match at the end, and it returns with 2 $?
> /check_command check_snmp_int!"Connection$"
> ERROR : Unknown interface Connection$$/
>
> \Z does not work
> /check_command check_snmp_int!"Connection\Z"
> ERROR : Unknown interface Connection\Z/
>
>
> I am at a loss for what to do. There seems to be an issue with #, and $. 
> Anyone have a solution to this? I have 15 servers with this issue. 
> Thanks in advance,
>
> Jason Woodward
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
> ::: Messages without supporting info will risk being sent to /dev/null
>   


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null