Graphing values from nagios

[Bill Jacqmein]

insert.pl has to know where the configuration files are.
and I think show.cgi has to have some edits made to it as well.



On 1/28/06, moshe sharon <moshesharon at gmail.com> wrote:
>
> Hello
>
> change the system to debug mode and then just run insert.pl it will tell
> you what wrong. you can also remove all the entries from the map file and
> add them one by one. then you will find out what causing the problem. if its
> not working paste the whole map file and ill check the regexp
>
> Moshe SHaron
>
>
> On 1/28/06, Toto Capuccino <shoktai at gmail.com> wrote:
> >
> > I try to graph the ping command :
> > the nagiosgraph.log gives:
> > Sat Jan 28 14:48:37 2006 CGI debug: Config rrdtool:/usr/bin/rrdtool
> > Sat Jan 28 14:48:37 2006 CGI debug: @db=
> > Sat Jan 28 14:48:37 2006 CGI info: Listing frparsv03_PING db files in
> > /usr/local/nagios/nagiosgraph/rrd:
> > Sat Jan 28 14:48:37 2006 CGI info: System /usr/bin/rrdtool graph - -a
> > PNG --start -34560000
> >
> > the map file contains :
> >
> > # Service type: ping
> > #   output:PING OK - Packet loss = 0%, RTA = 0.00 m
> > /output:PING.*?(\d+)%.+?([.\d]+)\sms/
> > and push @s, [ ping,
> >                [ losspct, GAUGE, $1      ],
> >                [ rta,     GAUGE, $2/1000 ] ];
> >
> > and the ouput of the check_ping gives :
> >
> > check_ping -H 10.1.1.5 -w 3000.0,80% -c 5000.0,100% -p 1
> > PING OK - Packet loss = 0%, RTA = 0.42 ms
> >
> > i see that the rrdtool get no values, so there should be at least an
> > erro in the map file, but i am not a perl coder. The service  type uses RTA
> > = 0.00 m and my ouput uses  ms instead of just m ...maybe it is one of
> > the reason i get broken links in the http page and no rrd files created.
> >
> > Can you give a hand, anyone ? Thank you.
> >
> > 2006/1/28, Toto Capuccino <shoktai at gmail.com>:
> > >
> > > i had a look and it fits to install from nagios 2 at leat but i am
> > > running version 1.3. Anyone got nagiosgraph running under nagios1.3?
> > > 2006/1/27, Todd Barbera < todd_barbera at wgbh.org>:
> > > >
> > > >  http://cvs.sourceforge.net/viewcvs.py/*checkout*/nagiosgraph/nagiosgraph/INSTALL
> > > >
> > > >
> > > >
> > > > Check out this install link. I believe you are missing some entries
> > > > in nagios.cfg (assuming you are using nagiosgraph and not
> > > > Nagiosgrapher).
> > > >
> > > >
> > > >
> > > > Todd
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > *From:* nagios-users-admin at lists.sourceforge.net [mailto:nagios-users-admin at lists.sourceforge.net
> > > > ] *On Behalf Of *Toto Capuccino
> > > > *Sent:* Friday, January 27, 2006 12:01 PM
> > > > *To:* nagios-users at lists.sourceforge.net
> > > > *Subject:* Re: [Nagios-users] Graphing values from nagios
> > > >
> > > >
> > > >
> > > > i didnt get nagiosgraph working, maybe you can help.
> > > > I followed the INSTALL paper.
> > > >
> > > >    - I got nagiosgraph.conf, map, insert.pl and show.cgi in
> > > >    /usr/local/nagios/nagiosgraph/
> > > >
> > > >
> > > >    - In *nagios.cfg* i set:
> > > >
> > > >      process_performance_data=1
> > > >      service_perfdata_command=process-service-perfdata
> > > >
> > > >    - In misccommands.cfg:
> > > >
> > > >         define command {
> > > >           command_name  process-service-perfdata
> > > >           command_line  /usr/local/nagios/nagiosgraph/insert.pl
> > > >    "$LASTCHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$OUTPUT$\t$PERFDATA$"
> > > >         }
> > > >
> > > >
> > > >    - an icon in .../share/images/logos/
> > > >    - in /usr/local/nagios/etc/serviceextinfo.cfg
> > > >
> > > >       Most services can be graphed with no particular
> > > >    configuration like this:
> > > >
> > > >         define serviceextinfo {
> > > >           service_description  serviceblabla
> > > >           host_name       server01,server02
> > > >           notes_url
> > > >    /nagiosgraph/show.cgi?host=$HOSTNAME$&service=$SERVICEDESC$
> > > >           icon_image      graph.gif
> > > >           icon_image_alt  View graphs
> > > >         }
> > > >
> > > >
> > > >    - ScriptAlias /nagiosgraph/ /usr/local/nagios/nagiosgraph/ in
> > > >    apache2.conf. The result i get is simply nothing. What did i
> > > >    forgot ? What do i have to put in nagios.cfg to link to
> > > >    serviceextinfo.cfg ? I put
> > > >    cfg_file=/usr/local/nagios/etc/serviceextinfo.cfg without success. Do i have
> > > >    to put something in services.cfg? Thanks
> > > >
> > > >   Have you installed a graphing add-on? nagiosgraph works fairly
> > > > well. You can pretty much graph anything so long as you have a grasp of
> > > > Perl.
> > > >
> > > >
> > > >
> > > > Todd
> > > >
> > > >
> > > >
> > > > -----Original Message-----
> > > > *From:* nagios-users-admin at lists.sourceforge.net [mailto:nagios-users-admin at lists.sourceforge.net
> > > > ] *On Behalf Of *Toto Capuccino
> > > > *Sent:* Friday, January 27, 2006 10:56 AM
> > > > *To:* nagios-users at lists.sourceforge.net
> > > > *Subject:* [Nagios-users] Graphing values from nagios
> > > >
> > > >
> > > >
> > > > Hi,
> > > >
> > > > Can someone show me the way to success ? I want to graph the values
> > > > i get from nsclient check-nt -v USEDDISKSPACE on servers.
> > > >
> > > > Is that possible ? How can i retrieve values monitored ?
> > > >
> > > > Thanks for thoughts, help, lessons.
> > > >
> > > >
> > > >
> > > >
> > >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20060128/52d23f88/attachment.html>