Graphing values from nagios

[moshe sharon]

Hello

change the system to debug mode and then just run insert.pl it will tell you
what wrong. you can also remove all the entries from the map file and add
them one by one. then you will find out what causing the problem. if its not
working paste the whole map file and ill check the regexp

Moshe SHaron


On 1/28/06, Toto Capuccino <shoktai at gmail.com> wrote:
>
> I try to graph the ping command :
> the nagiosgraph.log gives:
> Sat Jan 28 14:48:37 2006 CGI debug: Config rrdtool:/usr/bin/rrdtool
> Sat Jan 28 14:48:37 2006 CGI debug: @db=
> Sat Jan 28 14:48:37 2006 CGI info: Listing frparsv03_PING db files in
> /usr/local/nagios/nagiosgraph/rrd:
> Sat Jan 28 14:48:37 2006 CGI info: System /usr/bin/rrdtool graph - -a PNG
> --start -34560000
>
> the map file contains :
>
> # Service type: ping
> #   output:PING OK - Packet loss = 0%, RTA = 0.00 m
> /output:PING.*?(\d+)%.+?([.\d]+)\sms/
> and push @s, [ ping,
>                [ losspct, GAUGE, $1      ],
>                [ rta,     GAUGE, $2/1000 ] ];
>
> and the ouput of the check_ping gives :
>
> check_ping -H 10.1.1.5 -w 3000.0,80% -c 5000.0,100% -p 1
> PING OK - Packet loss = 0%, RTA = 0.42 ms
>
> i see that the rrdtool get no values, so there should be at least an erro
> in the map file, but i am not a perl coder. The service  type uses RTA =
> 0.00 m and my ouput uses  ms instead of just m ...maybe it is one of the
> reason i get broken links in the http page and no rrd files created.
>
> Can you give a hand, anyone ? Thank you.
>
> 2006/1/28, Toto Capuccino <shoktai at gmail.com>:
> >
> > i had a look and it fits to install from nagios 2 at leat but i am
> > running version 1.3. Anyone got nagiosgraph running under nagios1.3?
> > 2006/1/27, Todd Barbera < todd_barbera at wgbh.org>:
> > >
> > >
> > > http://cvs.sourceforge.net/viewcvs.py/*checkout*/nagiosgraph/nagiosgraph/INSTALL
> > >
> > >
> > >
> > > Check out this install link. I believe you are missing some entries in
> > > nagios.cfg (assuming you are using nagiosgraph and not Nagiosgrapher).
> > >
> > >
> > >
> > >
> > > Todd
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* nagios-users-admin at lists.sourceforge.net [mailto:
> > > nagios-users-admin at lists.sourceforge.net] *On Behalf Of *Toto
> > > Capuccino
> > > *Sent:* Friday, January 27, 2006 12:01 PM
> > > *To:* nagios-users at lists.sourceforge.net
> > > *Subject:* Re: [Nagios-users] Graphing values from nagios
> > >
> > >
> > >
> > > i didnt get nagiosgraph working, maybe you can help.
> > > I followed the INSTALL paper.
> > >
> > >    - I got nagiosgraph.conf, map, insert.pl and show.cgi in
> > >    /usr/local/nagios/nagiosgraph/
> > >
> > >
> > >    - In *nagios.cfg* i set:
> > >
> > >      process_performance_data=1
> > >      service_perfdata_command=process-service-perfdata
> > >
> > >    - In misccommands.cfg:
> > >
> > >         define command {
> > >           command_name  process-service-perfdata
> > >           command_line  /usr/local/nagios/nagiosgraph/insert.pl
> > >    "$LASTCHECK$\t$HOSTNAME$\t$SERVICEDESC$\t$OUTPUT$\t$PERFDATA$"
> > >         }
> > >
> > >
> > >    - an icon in .../share/images/logos/
> > >    - in /usr/local/nagios/etc/serviceextinfo.cfg
> > >
> > >       Most services can be graphed with no particular configuration
> > >    like this:
> > >
> > >         define serviceextinfo {
> > >           service_description  serviceblabla
> > >           host_name       server01,server02
> > >           notes_url
> > >    /nagiosgraph/show.cgi?host=$HOSTNAME$&service=$SERVICEDESC$
> > >           icon_image      graph.gif
> > >           icon_image_alt  View graphs
> > >         }
> > >
> > >
> > >    - ScriptAlias /nagiosgraph/ /usr/local/nagios/nagiosgraph/ in
> > >    apache2.conf. The result i get is simply nothing. What did i
> > >    forgot ? What do i have to put in nagios.cfg to link to
> > >    serviceextinfo.cfg ? I put
> > >    cfg_file=/usr/local/nagios/etc/serviceextinfo.cfg without success. Do i have
> > >    to put something in services.cfg? Thanks
> > >
> > >   Have you installed a graphing add-on? nagiosgraph works fairly well.
> > > You can pretty much graph anything so long as you have a grasp of Perl.
> > >
> > >
> > >
> > > Todd
> > >
> > >
> > >
> > > -----Original Message-----
> > > *From:* nagios-users-admin at lists.sourceforge.net [mailto:
> > > nagios-users-admin at lists.sourceforge.net] *On Behalf Of *Toto
> > > Capuccino
> > > *Sent:* Friday, January 27, 2006 10:56 AM
> > > *To:* nagios-users at lists.sourceforge.net
> > > *Subject:* [Nagios-users] Graphing values from nagios
> > >
> > >
> > >
> > > Hi,
> > >
> > > Can someone show me the way to success ? I want to graph the values i
> > > get from nsclient check-nt -v USEDDISKSPACE on servers.
> > >
> > > Is that possible ? How can i retrieve values monitored ?
> > >
> > > Thanks for thoughts, help, lessons.
> > >
> > >
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20060128/02599f06/attachment.html>