[Nagiosplug-help] How to interpret CRC32 errors?

Ralph.Grothe at itdz-berlin.de Ralph.Grothe at itdz-berlin.de
Fri Aug 5 18:14:34 CEST 2005
Previous message: [Nagiosplug-help] How to interpret CRC32 errors?
Next message: [Nagiosplug-help] How to interpret CRC32 errors?
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
When I had these CRC32 errors it was owe to some smut getting
written to stderr.

Maybe it's the same with your plug-in?

I think your plug-in is in Perl, wan't it?

Try doing an explicit close of stderr at the to, or better yet in
a BEGIN block.

e.g.

close(STDERR);

But if you're plug-in is forking through system() I think this
wouldn't help.
Then you probably would have to do shell type redirecting.





> -----Original Message-----
> From: HP Geeza [mailto:getbacktome3 at hotmail.com]
> Sent: Friday, August 05, 2005 6:10 PM
> To: Ralph.Grothe at itdz-berlin.de;
nagios-users at lists.sourceforge.net
> Subject: RE: [Nagiosplug-help] How to interpret CRC32 errors?
> 
> 
> All,
> 
> I have now started from stracth and tried to setup 
> nrpe...however when i now 
> run the command from my nagios box i see the following error 
> message in the 
> event log on the remote windows machine:
> 
> NRPE_NT: Error: Request packed has invalid CRC32
> NRPE_NT: Client request was invalid, bailing out.......
> 
> HAS ANY BODY seen this behaviour before???
> 
> Ralph was this something you was faced with???
> 
> Any help would be much appreciated...
> 
> >From: Ralph.Grothe at itdz-berlin.de
> >To: getbacktome3 at hotmail.com
> >Subject: RE: [Nagios-users] RE: [Nagiosplug-help] How to 
> interpret CRC32 
> >errors?
> >Date: Fri, 5 Aug 2005 16:23:52 +0200
> >
> >I'm sorry, I hadn't looked carefully enough at the source.
> >
> >In the begining there's a macro conditional
> >
> >#ifdef HAVE_SSL
> >SSL_METHOD *meth;
> >SSL_CTX *ctx;
> >SSL *ssl;
> >int use_ssl=TRUE;
> >#else
> >int use_ssl=FALSE;
> >#endif
> >
> >
> >where they check if the Makefile has the macro HAVE_SSL
defined.
> >
> >Looks like your binary was built with SSL enabled.
> >
> >You would have to compile after a "configure --disable-ssl
..."
> >without SSL support.
> >
> >Maybe you can ask in the mailing list if someone has built a
> >binary for Win32
> >with SSL disabled, or knows a download site?
> >Have you checked the site where you got this one if there are
> >different versions?
> >Or does a README say what to do to suppress SSL?
> >
> >If you can only get nrpe for win32 with SSL then you would
have
> >to create SSL certificate
> >(you can make up your own certification authority)
> >If you use OpenSSL it's not too difficult because it comes
with a
> >Perl script that will do
> >that for you.
> >
> >But I can't believe that there is no nrpe for windows without
> >SSL.
> >
> >
> >
> > > -----Original Message-----
> > > From: HP Geeza [mailto:getbacktome3 at hotmail.com]
> > > Sent: Friday, August 05, 2005 4:14 PM
> > > To: Ralph.Grothe at itdz-berlin.de
> > > Subject: RE: [Nagios-users] RE: [Nagiosplug-help] How to
> > > interpret CRC32
> > > errors?
> > >
> > >
> > > sorry for being such a pain...but im still stuck!!!
> > >
> > > ive tried running:
> > >
> > > ./check_nrpe <ip address of remote machine> -n -c
reboot_server
> > >
> > > But that gives me an error: Incorrect command line
arguments
> >supplied
> > >
> > > I dont have to re compile or something do i?? - if soo what
> > > commands will i
> > > need to run?
> > >
> > > Any ideas??? - please help.  Yes you are rite this nrpe
stuff
> > > isn't well
> > > documented at all....im sooo confused
> > >
> > >
> > > >From: Ralph.Grothe at itdz-berlin.de
> > > >To: getbacktome3 at hotmail.com
> > > >Subject: RE: [Nagios-users] RE: [Nagiosplug-help] How to
> > > interpret CRC32
> > > >errors?
> > > >Date: Fri, 5 Aug 2005 16:06:19 +0200
> > > >
> > > >Hm, I've so far disabled SSL altogether with my nrpe
builds.
> > > >SSL/TLS would only complicate things.
> > > >I will try this when my basic setting works.
> > > >
> > > >I guess you used a prebuilt binary?
> > > >
> > > >Wait, I've just looked in the source code of check_nrpe.c,
> > > >and in the switch-case block where the **argv is parsed
there
> >is
> > > >an entry for option -n
> > > >where the comment reads that you should use this switch to
> > > >disable SSL.
> > > >
> > > >So I would suggest that you put in your check_nrpe call an
> > > >additional "-n".
> > > >
> > > >That's what nags me about nagios, that many features
aren't
> >well
> > > >documented.
> > > >If you run check_nrpe --help they won't tell you anything
> >about
> > > >-n.
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: HP Geeza [mailto:getbacktome3 at hotmail.com]
> > > > > Sent: Friday, August 05, 2005 3:52 PM
> > > > > To: Ralph.Grothe at itdz-berlin.de
> > > > > Subject: RE: [Nagios-users] RE: [Nagiosplug-help] How
to
> > > > > interpret CRC32
> > > > > errors?
> > > > >
> > > > >
> > > > > Hi Ralph
> > > > >
> > > > > Ive managed to install the nrpe service on my windows
host
> > > > > but when i run
> > > > > the command from my nagios box the event log on the
windows
> > > > > machine says
> > > > > that the ssl handshake failed....i am not too sure how
to
> > > > > configure ssl...
> > > > >
> > > > > is there a way round this problem?
> > > > >
> > > > >
> > > > > >From: Ralph.Grothe at itdz-berlin.de
> > > > > >To: getbacktome3 at hotmail.com
> > > > > >Subject: RE: [Nagios-users] RE: [Nagiosplug-help] How
to
> > > > > interpret CRC32
> > > > > >errors?
> > > > > >Date: Fri, 5 Aug 2005 15:35:20 +0200
> > > > > >
> > > > > >Hi Geeza,
> > > > > >
> > > > > >you can't run this from your Linux host (I suppose
this is
> > > >your
> > > > > >Nagios server, whereas the Windows box you want to
shut
> >down
> > > >is
> > > > > >your remote host),
> > > > > >because Win32.pm is not made for Linux.
> > > > > >
> > > > > >I think you have to install the Windows version of the
> >NRPE on
> > > > > >your Windows host.
> > > > > >There should be a README or INSTALL file how this is
done
> > > >under
> > > > > >Windows.
> > > > > >It should also explain how the nrpe daemon can be
started
> >as a
> > > > > >Windows service.
> > > > > >
> > > > > >On the Windows box you need to define a command in
> >nrpe.cfg
> > > >that
> > > > > >is the same as how you would run your shutdown script.
> > > > > >
> > > > > >Then you have to start the nrpe service on the Windows
> >box.
> > > > > >
> > > > > >In the nrpe binaries for Windows should also be a
> >check_nrpe
> > > > > >executable.
> > > > > >You can use this to test if your command gets executed
by
> >nrpe
> > > > > >service on the Windows localhost.
> > > > > >Of course for this test I would modify the shutdown
script
> >so
> > > > > >that it wouldn't really shutdown
> > > > > >but only display for instance what it would be doing.
> > > > > >As -H you have to give the localhost IP because you're
> >running
> > > > > >this on the same box.
> > > > > >As -c you have to pass the name of your command you
> >defined in
> > > > > >nrpe.cfg above.
> > > > > >
> > > > > >Then you must build or get the binary for Linux of
> >check_nrpe,
> > > > > >and install it in the libexec directory of your Linux
> >Nagios
> > > > > >server.
> > > > > >You should now be able run check_nrpe -H
> >IP_of_Windows_Host -c
> > > > > >Shutdown_Command
> > > > > >much the same like you have done on the Windows host.
> > > > > >This time you only have to specify the IP of the
Windows
> >host
> > > > > >instead of localhost or 127.0.0.1
> > > > > >
> > > > > >If that test also worked you can define a
check_command
> >and a
> > > > > >service in your nagios config files,
> > > > > >and restart the nagios server.
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: HP Geeza [mailto:getbacktome3 at hotmail.com]
> > > > > > > Sent: Thursday, August 04, 2005 7:07 PM
> > > > > > > To: Ralph.Grothe at itdz-berlin.de
> > > > > > > Subject: RE: [Nagios-users] RE: [Nagiosplug-help]
How
> >to
> > > > > > > interpret CRC32
> > > > > > > errors?
> > > > > > >
> > > > > > >
> > > > > > > Here's my sample test.pl file:
> > > > > > >
> > > > > > > #!/usr/bin/perl
> > > > > > >
> > > > > > > use strict;
> > > > > > > use Win32;
> > > > > > >
> > > > > > > Win32::InitiateSystemShutdown("<machines ip>",
"BYE",
> >1, 1,
> > > >1);
> > > > > > >
> > > > > > >
> > > > > > > I copied the Win32.pm to a location that the system
> >could
> > > > > > > seee....however i
> > > > > > > now get the following error message:
> > > > > > >
> > > > > > > Undefined subroutine &Win32::InitiateSystemShutdown
> >called
> > > >at
> > > > > > > ./test.pl line
> > > > > > > 6.
> > > > > > >
> > > > > > > any ideas???
> > > > > > >
> > > > > > >
> > > > > > > >From: Ralph.Grothe at itdz-berlin.de
> > > > > > > >To: getbacktome3 at hotmail.com
> > > > > > > >Subject: RE: [Nagios-users] RE: [Nagiosplug-help]
How
> >to
> > > > > > > interpret CRC32
> > > > > > > >errors?
> > > > > > > >Date: Thu, 4 Aug 2005 18:48:16 +0200
> > > > > > > >
> > > > > > > >Hi Geeza,
> > > > > > > >
> > > > > > > >do you mean your question regarding the remote
> >shutdown of
> > > > > > > >Windows boxes?
> > > > > > > >
> > > > > > > >I'm sure that this can be accomplished.
> > > > > > > >
> > > > > > > >However, I'm absolutely not into Windows.
> > > > > > > >
> > > > > > > >If you could wait until tomorrow, or haven't
received
> >a
> > > >hack
> > > > > >from
> > > > > > > >someone else by then,
> > > > > > > >I could ask our Windows admin what is required on
a
> > > >Windows
> > > > > >host
> > > > > > > >to do this.
> > > > > > > >
> > > > > > > >I would guess only some tampering with some
registry
> >key
> > > >or
> > > > > >so.
> > > > > > > >
> > > > > > > >I also don't know the Microsoft interpreters like
> >Windows
> > > > > > > >Scripting Host or even the .Net framework.
> > > > > > > >Anyone familiar with those can quickly script
> >something
> > > >that
> > > > > >will
> > > > > > > >do what you need.
> > > > > > > >
> > > > > > > >I only script in Perl and Unix shells.
> > > > > > > >
> > > > > > > >But you can as well install Perl on a Windows box,
and
> >do
> > > >all
> > > > > > > >sorts of sysadmin tasks through Perl.
> > > > > > > >They have special modules that give you access to
the
> > > >Registry
> > > > > > > >and other Windows typical interfaces.
> > > > > > > >
> > > > > > > >
> > > > > > > >Sorry, for not being of more help
> > > > > > > >
> > > > > > > >Ralph
> > > > > > > >
> > > > > > > >
> > > > > > > > > -----Original Message-----
> > > > > > > > > From: HP Geeza
[mailto:getbacktome3 at hotmail.com]
> > > > > > > > > Sent: Thursday, August 04, 2005 6:40 PM
> > > > > > > > > To: Ralph.Grothe at itdz-berlin.de
> > > > > > > > > Subject: RE: [Nagios-users] RE:
[Nagiosplug-help]
> >How
> > > >to
> > > > > > > > > interpret CRC32
> > > > > > > > > errors?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Hi Ralph,
> > > > > > > > >
> > > > > > > > > I have just posted an NRPE related
> >questoin....could
> > > >you
> > > > > > > > > please help???
> > > > > > > > >
> > > > > > > > > >From: Ralph.Grothe at itdz-berlin.de
> > > > > > > > > >To: nagios-users at lists.sourceforge.net
> > > > > > > > > >CC: cshaffer at gmail.com
> > > > > > > > > >Subject: RE: [Nagios-users] RE:
[Nagiosplug-help]
> >How
> > > >to
> > > > > > > > > interpret CRC32
> > > > > > > > > >errors?
> > > > > > > > > >Date: Thu, 4 Aug 2005 18:31:29 +0200
> > > > > > > > > >
> > > > > > > > > >Good news (for me).
> > > > > > > > > >
> > > > > > > > > >I found the remedy against unruly CRC32 NRPE
> >chokes.
> > > > > > > > > >
> > > > > > > > > >When I tested my script at the shell I made
sure
> >by
> > > > > > > >redirecting
> > > > > > > > > >stderr to /dev/null
> > > > > > > > > >that indeed nothing was sent there.
> > > > > > > > > >
> > > > > > > > > >However, when this script got executed (or
rather
> > > > > >crchecked)
> > > > > > > >by
> > > > > > > > > >nrpe
> > > > > > > > > >something must have sneaked to stderr.
> > > > > > > > > >
> > > > > > > > > >So I simply put this statement in the
beginning of
> >my
> > > > > >script:
> > > > > > > > > >
> > > > > > > > > >[saz at inwo2]
> > > > > > > > > >$ grep -n exec\
> > > >/usr/local/nagios/libexec/check_hpva.sh
> > > > > > > > > >6:exec 2>/dev/null
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >By shutting stderr the a priori crcheck cannot
> >produce
> > > > > > > > > >differences.
> > > > > > > > > >
> > > > > > > > > >Now I can execute through nrpe
> > > > > > > > > >
> > > > > > > > > >[saz at inwo2]
> > > > > > > > > >$ /usr/local/nagios/libexec/check_nrpe -H
> >127.0.0.1 -c
> > > > > > > > > >check_hpva_INWO2
> > > > > > > > > >OK:     HP Virtual Array "va" on inwo2 all
FRUs
> >State
> > > >Good
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >And even from the nagios server remotely this
> >works
> > > >now
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >[nagios at daisy:~]
> > > > > > > > > >$ libexec/check_nrpe -H inwo2 -c
check_hpva_INWO2
> > > > > > > > > >OK:     HP Virtual Array "va" on inwo2 all
FRUs
> >State
> > > >Good
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >Lesson learnt, for all own plug-ins you write
> > > >explicitly
> > > > > >close
> > > > > > > > > >stderr
> > > > > > > > > >to avoid any CRC32 annoyances.
> > > > > > > > > >
> > > > > > > > > >So this conclusion would take only one line to
be
> > > >added to
> > > > > >the
> > > > > > > > > >documentation!
> > > > > > > > > >
> > > > > > > > > >I again rechecked the "Nagios plug-in
development
> > > > > >guidelines"
> > > > > > > >but
> > > > > > > > > >didn't find such a reference.
> > > > > > > > > >It would have saved me two hours and you my
> >reduntant
> > > > > >noise.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >Happy NRPEing
> > > > > > > > > >
> > > > > > > > > >Ralph
> > > > > > > > > >
> > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > From:
nagios-users-admin at lists.sourceforge.net
> > > > > > > > > > >
> >[mailto:nagios-users-admin at lists.sourceforge.net]On
> > > > > >Behalf
> > > > > > > >Of
> > > > > > > > > > > Ralph.Grothe at itdz-berlin.de
> > > > > > > > > > > Sent: Thursday, August 04, 2005 5:37 PM
> > > > > > > > > > > To: ae at op5.se
> > > > > > > > > > > Cc: nagios-users at lists.sourceforge.net
> > > > > > > > > > > Subject: [Nagios-users] RE:
[Nagiosplug-help]
> >How
> > > >to
> > > > > > > >interpret
> > > > > > > > > >CRC32
> > > > > > > > > > > errors?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > You're asking people to help you on their
> >spare
> > > >time.
> > > > > > > >Most of
> > > > > > > > > > > your
> > > > > > > > > > > > questions so far have been either
no-brainers
> > > >that
> > > > > >you
> > > > > > > >would
> > > > > > > > > > > > have been
> > > > > > > > > > > > able to figure out for yourself had you
made
> >the
> > > > > >effort,
> > > > > > > >or
> > > > > > > > > > > > of the kind
> > > > > > > > > > > > that would take considerable effort to
answer
> > > > > >properly.
> > > > > > > > > > >
> > > > > > > > > > > I know that I waste the time of people who
are
> > > >willing
> > > > > >to
> > > > > > > >help
> > > > > > > > > > > me.
> > > > > > > > > > >
> > > > > > > > > > > Did I know more about Nagios I would
happily
> >pay
> > > >back
> > > > > >by
> > > > > > > > > > > answering others' questions.
> > > > > > > > > > >
> > > > > > > > > > > I had the impression that the developpers
had
> >left
> > > >the
> > > > > > > > > > > documentation sketchy in favour of
directing
> >people
> > > >to
> > > > > >the
> > > > > > > > > > > nagios-users mailing list (at least that's
what
> > > >every
> > > > > > > >plug-in's
> > > > > > > > > > > help screen suggests)
> > > > > > > > > > > I know what an unpleasant duty it is for
> >developers
> > > >to
> > > > > > > > > >document.
> > > > > > > > > > >
> > > > > > > > > > > To someone so much and probably long time
> >involved
> > > >in
> > > > > >the
> > > > > > > > > >Nagios
> > > > > > > > > > > project as you
> > > > > > > > > > > (only assuming this as I don't know your
> >background
> > > >or
> > > > > >role
> > > > > > > > > >here)
> > > > > > > > > > > my questions may seem like brain farts.
> > > > > > > > > > >
> > > > > > > > > > > I only wonder why, if you are so pissed off
by
> > > >them,
> > > > > >simply
> > > > > > > > > >don't
> > > > > > > > > > > ignore them.
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On a sidenote, it's considered very rude
to
> > > > > >cross-post
> > > > > > > >unless
> > > > > > > > > > > you're
> > > > > > > > > > > > making an announcement of some sort, so
> >please
> > > > > >refrain
> > > > > > > >from
> > > > > > > > > > > > doing so in
> > > > > > > > > > > > the future.
> > > > > > > > > > >
> > > > > > > > > > > I didn't know I was cross posting.
> > > > > > > > > > > I didn't regard sending my questions to
> > > >nagios-users
> > > > > >and
> > > > > > > > > > > nagiosplug-help simultaniously
> > > > > > > > > > > as real cross postings.
> > > > > > > > > > > I didn't post in other 10 lists or so, and
I
> >didn't
> > > > > >spam or
> > > > > > > > > >post
> > > > > > > > > > > off-topic announcements, nor insult someone
> >here.
> > > > > > > > > > >
> > > > > > > > > > > If the mailing list moderators opened this
list
> >to
> > > >the
> > > > > > > >public
> > > > > > > > > >of
> > > > > > > > > > > all kinds of Nagios users
> > > > > > > > > > > list subscribers have to live with dumb
> >questions
> > > >of
> > > > > >Nagios
> > > > > > > > > > > newbies like me.
> > > > > > > > > > >
> > > > > > > > > > > Having learned that I breached the list
> >netiquette
> > > >I
> > > > > >will
> > > > > > > >only
> > > > > > > > > > > post to one list in the future.
> > > > > > > > > > >
> > > > > > > > > > > > Did you log in as the NRPE user or did
you
> >just
> > > >su?
> > > > > > > >su'ing
> > > > > > > > > > > > maintains the
> > > > > > > > > > > > environment settings of the old user,
which
> >will
> > > >have
> > > > > > > >effect
> > > > > > > > > >on
> > > > > > > > > > > some
> > > > > > > > > > > > programs.
> > > > > > > > > > >
> > > > > > > > > > > No simple su-ing.
> > > > > > > > > > > Even if I had, I would have taken care to
do a
> >full
> > > >"su
> > > > > >-"
> > > > > > > >to
> > > > > > > > > > > also obtain the account's environment.
> > > > > > > > > > > I am and was logged in under the account
that I
> > > > > >configured
> > > > > > > > > >inetd
> > > > > > > > > > > to run the nrpe server as
> > > > > > > > > > > (see 5th field, or 4th field for you)
> > > > > > > > > > >
> > > > > > > > > > > [saz at inwo2]
> > > > > > > > > > > $ id
> > > > > > > > > > > uid=102(saz) gid=20(users) groups=102(saz)
> > > > > > > > > > >
> > > > > > > > > > > [saz at inwo2]
> > > > > > > > > > > $ grep nrpe /etc/inetd.conf
> > > > > > > > > > > nrpe    stream tcp nowait saz
> > > > > >/usr/local/nagios/sbin/nrpe
> > > > > > > >nrpe
> > > > > > > > > >-c
> > > > > > > > > > > /usr/local/nagios/etc/nrpe.cfg -i
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > > check_hpva.sh prints something to stderr.
> >This
> > > >causes
> > > > > >the
> > > > > > > > > > > > NRPE daemon to
> > > > > > > > > > > > miscalculate the checksum. When the
plugin
> >does
> > > >the
> > > > > >same
> > > > > > > >it
> > > > > > > > > > > > arrives at
> > > > > > > > > > > > an invalid result.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > My script isn't writing anything to stderr,
and
> > > >it's
> > > > > > > >outputting
> > > > > > > > > >a
> > > > > > > > > > > single line to stdout
> > > > > > > > > > > (which is I think is in accordance to
plug-in
> > > > > >developer's
> > > > > > > > > > > guidelines)
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > [saz at inwo2]
> > > > > > > > > > > $ /usr/local/nagios/libexec/check_hpva.sh
> > > >2>/dev/null |
> > > > > >cat
> > > > > > > >-n
> > > > > > > > > > >      1  OK:     HP Virtual Array "va" on
inwo2
> >all
> > > >FRUs
> > > > > > > >State
> > > > > > > > > > > Good
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > >-------------------------------------------------------
> > > > > > > > > > > SF.Net email is Sponsored by the Better
> >Software
> > > > > >Conference
> > > > > > > >&
> > > > > > > > > >EXPO
> > > > > > > > > > > September 19-22, 2005 * San Francisco, CA *
> > > >Development
> > > > > > > > > > > Lifecycle Practices
> > > > > > > > > > > Agile & Plan-Driven Development * Managing
> >Projects
> > > >&
> > > > > >Teams
> > > > > > > >*
> > > > > > > > > > > Testing & QA
> > > > > > > > > > > Security * Process Improvement &
Measurement *
> > > > > > > > > >http://www.sqe.com/bsce5sf
> > > > > > > > >
>_______________________________________________
> > > > > > > > > >Nagios-users mailing list
> > > > > > > > > >Nagios-users at lists.sourceforge.net
> > > > > > > > >
> > > >
>https://lists.sourceforge.net/lists/listinfo/nagios-users
> > > > > > > > > >::: Please include Nagios version, plugin
version
> >(-v)
> > > >and
> > > > > >OS
> > > > > > > > > >when reporting any issue.
> > > > > > > > > >::: Messages without supporting info will risk
> >being
> > > >sent
> > > > > >to
> > > > > > > > > >/dev/null
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > >-------------------------------------------------------
> > > > > > > > > >SF.Net email is Sponsored by the Better
Software
> > > > > >Conference &
> > > > > > > >EXPO
> > > > > > > > > >September 19-22, 2005 * San Francisco, CA *
> > > >Development
> > > > > > > > > Lifecycle Practices
> > > > > > > > > >Agile & Plan-Driven Development * Managing
> >Projects &
> > > > > >Teams
> > > > > > > > > * Testing & QA
> > > > > > > > > >Security * Process Improvement & Measurement *
> > > > > > > >http://www.sqe.com/bsce5sf
> > > > > > > > >_______________________________________________
> > > > > > > > >Nagios-users mailing list
> > > > > > > > >Nagios-users at lists.sourceforge.net
> > > > > > > >
> > > >
>https://lists.sourceforge.net/lists/listinfo/nagios-users
> > > > > > > > >::: Please include Nagios version, plugin
version
> >(-v)
> > > >and
> > > > > >OS
> > > > > > > >when
> > > > > > > > >reporting any issue.
> > > > > > > > >::: Messages without supporting info will risk
being
> > > >sent to
> > > > > > > >/dev/null
> > > > > > > >
> > > > > > >
> > > > > >
> > > >
> >
>________________________________________________________________
> > > > > >_
> > > > > > > >Be the first to hear what's new at MSN - sign up
to
> >our
> > > >free
> > > > > > > >newsletters!
> > > > > > > >http://www.msn.co.uk/newsletters
> > > > > > >
> > > > > > >
> > > > >
> > > >
> >
>________________________________________________________________
> > > >_
> > > > > > > Winks & nudges are here - download MSN Messenger
7.0
> >today!
> > > > > > > http://messenger.msn.co.uk
> > > > > > >
> > > > >
> > > > >
> > >
> >
>________________________________________________________________
> >_
> > > > > Be the first to hear what's new at MSN - sign up to our
> >free
> > > > > newsletters!
> > > > > http://www.msn.co.uk/newsletters
> > > > >
> > >
> > >
>
>________________________________________________________________
_
> > > Be the first to hear what's new at MSN - sign up to our
free
> > > newsletters!
> > > http://www.msn.co.uk/newsletters
> > >
> 
>
_________________________________________________________________
> Be the first to hear what's new at MSN - sign up to our free 
> newsletters! 
> http://www.msn.co.uk/newsletters
> 


-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null
Previous message: [Nagiosplug-help] How to interpret CRC32 errors?
Next message: [Nagiosplug-help] How to interpret CRC32 errors?
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Users mailing list