Monitoring using MIBs

[The Noob]

Hello,

Someone knows how to check Failover Status On bluecoat ?
In fact Bluecoat send a syslog when it changes states Master to backup but
it does not send any snmp trap.
SO I search an OID to pool the failover status .
Can you help me ?
Best regards


2007/12/19 Hugo Rebello <hugo.rebello at dhl.com>

>  One more question.
>
> I have the mib information below, however I don't know how can I use it on
> the Nagios check.
>
> I have tried this command, but I've just receive SNMP Warning message.
>
> ./check_snmp -H 192.168.1.12 -o
> .iso.org.dod.internet.private.enterprises.blueCoat.blueCoatMgmt.deviceUsageMIB.deviceUsageMIBObjects.deviceUsageTable.deviceUsageEntry.deviceUsageStatus.1
> -C public
>
> SNMP WARNING - ok(1)
>
> ******************
> *usage.mib*
>
> The usage.mib file sends a notification when the percentage of available
> space that is used exceeds a threshold specified by the deviceUsageHigh
> variable.
>
> Resources that can be monitored include:
>
>     - Disk
>    - CPU
>
> The usage.mib trap variables and their values are described in the table
> below.
>
>   Trap Variable
>
> Description
>
> Value
>
> deviceUsageName
>
> The textual name of the resource; for example, CPU..
>
> ---
>
> deviceUsagePercent
>
> Percentage of the resource that is in use
>
> ---
>
> deviceUsageStatus
>
> Comparison of the deviceUsagePercent value with the deviceUsageHigh
> variable.
>
> ok(1)
> high(2)
>
>  The deviceUsageHigh variable can specify values for each resource, using
> an SNMP set operation. A notification is sent when the value is reached. For
> more information on the deviceUsageHigh variable, refer to the usage.mib
> file.
>
> The error messages produced by the deviceUsageHigh variable are described
> in the table below.
>
>   Message
>
> Status
>
> ok (1)
>
> Normal
>
> high (2)
>
> Warning
>   ***************************
>
>  Thank you.
> Cheers,
>
>
>
>
>
> Miah, W (Wadud) escreveu:
>
> Here's an example on using snmpwalk:
>
> snmpwalk -Of -c public -v1 -m IFT-SNMP-MIB 172.16.140.35 private
>
> where the MIB is stored in /usr/share/snmp/mibs/. The MIB can also be
> specified in the check_snmp plugin, which obtains it from the specified
> path. Examine the MIB first and browse through the output of snmpwalk to
> obtain OID of interest.
>
> Hope this helps.
>
> -----Original Message-----
> From: nagios-users-bounces at lists.sourceforge.net
> [mailto:nagios-users-bounces at lists.sourceforge.net <nagios-users-bounces at lists.sourceforge.net>] On Behalf Of Hugo
> Rebello
> Sent: 18 December 2007 11:20
> To: nagios-users at lists.sourceforge.net
> Subject: [Nagios-users] Monitoring using MIBs
>
> Can anyone help me ?
>
> I'd like to monitor a specific proxy service (Blue Coat) and I don't
> know if Nagios works with different mibs.
> Anybody knows a good tip about that ?
>
> Thank you.
>
> Cheers,
> Hugo
>
>
>
>
> ------------------------------------------------------------------------
> -
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketp
> lace
> _______________________________________________
> Nagios-users mailing listNagios-users at lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when
> reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
>
>
>
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services
> for just about anything Open Source.
>
> http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> ::: Please include Nagios version, plugin version (-v) and OS when
> reporting any issue.
> ::: Messages without supporting info will risk being sent to /dev/null
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20090319/be132549/attachment.html>
-------------- next part --------------
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
-------------- next part --------------
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null