check_load issue

[jeremiah]

I found this..

File: /etc/nagios-plugins/config/load.cfg                                                                        

# 'check_load' command definition
define command{
        command_name    check_load
        command_line    /usr/lib/nagios/plugins/check_load --warning=
$ARG1$,$ARG2$,$ARG3$ --critical=$ARG4$,$ARG5$,$ARG6$
        }

I've been using an older nagios book but just ordered up the apress
nagios 2 version.

Thanks,
JJ


On Thu, 2008-10-16 at 14:03 -0700, Aaron Segura wrote:
> Please, always reply on-list.
> 
> If the check is running via nagios, the command is defined somewhere.
> Find it and send it.  We can't help without that information.
> 
> Also, you would benefit from reading the documentation pertaining to
> service/command definitions.
> 
> -----Original Message-----
> From: jeremiah [mailto:jeremiah.jester at panasonic.aero]
> Sent: Thursday, October 16, 2008 2:57 PM
> To: Aaron Segura
> Subject: RE: [Nagios-users] check_load issue
> 
> Aaron,
> 
> Thanks for your response. Here's the message I sent to the list.
> 
> 
>                               Date:
> Thu, 16 Oct 2008 13:49:17 -0700
> 
> 
> I checked my commands.cfg file and noticed the command wasn't defined
> so
> I went  and put this in there...
> 
> define command {
>         command_name    check_load
>         command_line    libexec/check_load -w $ARG1$ $ARG2$ $ARG3 -c
> $ARG4$ $ARG5$ $ARG6$
> }
> 
> However, when i restarted nagios it told me the command was already
> defined. So, i then commented it out and restarted..it started but
> still
> the same error/problem: ""Warning threshold must be float or float
> triplet! "
> 
> Thoughts?
> 
> JJ
> 
> 
> 
> On Thu, 2008-10-16 at 13:40 -0700, Aaron Segura wrote:
> > Going to at least need to see the command definition.
> >
> > -----Original Message-----
> > From: jeremiah [mailto:jeremiah.jester at panasonic.aero]
> > Sent: Thursday, October 16, 2008 2:33 PM
> > To: Nagios
> > Subject: [Nagios-users] check_load issue
> >
> > My check_load service keeps on giving me the following error.
> >
> > "Warning threshold must be float or float triplet! "
> >
> > However, when i run the command from the system it works just fine.
> >
> > ./check_load -w 10.0,8.0,5.0 -c 15.0,10.0,8.0
> > OK - load average: 0.01, 0.02, 0.00|load1=0.010;10.000;15.000;0;
> > load5=0.020;8.000;10.000;0; load15=0.000;5.000;8.000;0;
> >
> > My services.cfg file looks as such..same values.
> >
> > check_command       check_load!10.0,8.0,5.0!15.0,10.0,8.0
> >
> > Any thoughts?
> >
> > Thanks,
> > JJ
> >
> >
> >
> >
> > Disclaimer: The information contained in this transmission,
> including
> > any
> > attachments, may contain confidential information of Panasonic
> > Avionics
> > Corporation.  This transmission is intended only for the use of the
> > addressee(s) listed above.  Unauthorized review, dissemination or
> > other
> > use
> > of the information contained in this transmission is strictly
> > prohibited.
> > If you have received this transmission in error or have reason to
> > believe
> > you are not authorized to receive it, please notify the sender by
> > return
> >
> > email and promptly delete the transmission.
> >
> >
> >
> >
> ------------------------------------------------------------------------
> > -
> > This SF.Net email is sponsored by the Moblin Your Move Developer's
> > challenge
> > Build the coolest Linux based applications with Moblin SDK & win
> great
> > prizes
> > Grand prize is a trip for two to an Open Source event anywhere in
> the
> > world
> > http://moblin-contest.org/redirect.php?banner_id=100&url=/
> > _______________________________________________
> > Nagios-users mailing list
> > Nagios-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/nagios-users
> > ::: Please include Nagios version, plugin version (-v) and OS when
> > reporting any issue.
> > ::: Messages without supporting info will risk being sent
> to /dev/null
> >
> >
> >
> 
> 
> 

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null