check_load issue

[jeremiah]

My check_load service keeps on giving me the following error.

"Warning threshold must be float or float triplet! "

However, when i run the command from the system it works just fine.

./check_load -w 10.0,8.0,5.0 -c 15.0,10.0,8.0
OK - load average: 0.01, 0.02, 0.00|load1=0.010;10.000;15.000;0;
load5=0.020;8.000;10.000;0; load15=0.000;5.000;8.000;0; 

My services.cfg file looks as such..same values.

check_command       check_load!10.0,8.0,5.0!15.0,10.0,8.0

Any thoughts?

Thanks,
JJ




Disclaimer: The information contained in this transmission, including any 
attachments, may contain confidential information of Panasonic Avionics
Corporation.  This transmission is intended only for the use of the 
addressee(s) listed above.  Unauthorized review, dissemination or other use 
of the information contained in this transmission is strictly prohibited. 
If you have received this transmission in error or have reason to believe 
you are not authorized to receive it, please notify the sender by return 
email and promptly delete the transmission.



-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null