check_snmp_int.pl: over 100%?

Daniel López dani at tydnet.org
Mon Jun 9 23:04:28 CEST 2008


On Sun June 8 2008 20:05:42 Ford, Andy wrote:

> I think my device has got erroneous info in it's reported ifSpeeds:
>
> RFC1213-MIB::ifSpeed.1 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.2 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.3 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.4 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.5 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.6 = Gauge32: 100000
> RFC1213-MIB::ifSpeed.7 = Gauge32: 10000
> RFC1213-MIB::ifSpeed.8 = Gauge32: 10000
>
> Those can't be right for these kind of interfaces, can they?
>
> RFC1213-MIB::ifDescr.1 = STRING: "eth-s1p1 Ethernet Layer Intel 10/100
> Ethernet"
> RFC1213-MIB::ifDescr.2 = STRING: "eth-s1p2 Ethernet Layer Intel 10/100
> Ethernet"
> RFC1213-MIB::ifDescr.3 = STRING: "eth-s1p3 Ethernet Layer Intel 10/100
> Ethernet"
> RFC1213-MIB::ifDescr.4 = STRING: "eth-s1p4 Ethernet Layer Intel 10/100
> Ethernet"
> RFC1213-MIB::ifDescr.5 = STRING: "eth-s4p1 Ethernet Layer Intel Gigabit
> Ethernet"
> RFC1213-MIB::ifDescr.6 = STRING: "eth-s4p2 Ethernet Layer Intel Gigabit
> Ethernet"
> RFC1213-MIB::ifDescr.7 = STRING: "eth-s4p3 Ethernet Layer Intel Gigabit
> Ethernet"
> RFC1213-MIB::ifDescr.8 = STRING: "eth-s4p4 Ethernet Layer Intel Gigabit
> Ethernet"
>
> I wonder if I need to just multiply by 1,000 or something.
>

http://www.mg-soft.si/mgMibExplorer-samples/RFC1213-MIB.html#ifspeed

-- 1.3.6.1.2.1.2.2.1.5
        ifSpeed OBJECT-TYPE
                SYNTAX Gauge
                ACCESS read-only
                STATUS mandatory
                DESCRIPTION
                        "An estimate of the interface's current bandwidth
                        in bits per second.  For interfaces which do not
                        vary in bandwidth or for those where no accurate
                        estimation can be made, this object should contain
                        the nominal bandwidth."


dani

-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null





More information about the Users mailing list