snmp v3 on 3600

[Brian Loe]

On Thu, Feb 14, 2008 at 10:09 AM, Larry Low <llow at telesphere.com> wrote:
> Here is a simple authNoPriv setup.  The snmp-server user will not show up on
>  the config but is stored in a private config in flash.  'show snmp user' can
>  be used to get info.
>
>  snmp-server group <group name> v3 auth access <acl list>
>  snmp-server user <user> <group> v3 auth md5 <password>
>
>  You will probably want to do more to lock down access as RW is available
>  with those commands.

I've done this with no luck... chasing a firewall issue as I'm only
getting timeouts.

Anything not obvious about how the firewall should be configured (out
of my control in this environment)? This is an ISP router  and the
firewall has UDP 161 opened up going out from Nagios server to the
router only.

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null