problem with router monitor

[Hugo Rebello]

Look the information below.

************************************
Serial0 is up, line protocol is up
  Hardware is PowerQUICC Serial
  Description: Connection
  Internet address is 10.10.10.6/30
  MTU 1500 bytes, BW 2024 Kbit, DLY 20000 usec,
     reliability 255/255, txload 4/255, rxload 3/255
  Encapsulation PPP, LCP Open
  Open: CDPCP, IPCP, loopback not set
  Last input 00:00:04, output 00:00:00, output hang never
  Last clearing of "show interface" counters 2w0d
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 30
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/5 (size/max total/threshold/drops)
     Conversations  0/26/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1518 kilobits/sec
  5 minute input rate 28000 bits/sec, 6 packets/sec
  5 minute output rate 37000 bits/sec, 16 packets/sec
     17370323 packets input, 4218756223 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 3 giants, 0 throttles
     437467 input errors, 27755 CRC, 210030 frame, 0 overrun, 0 ignored,
199648 abort
     14743915 packets output, 3464182642 bytes, 0 underruns
	0 output errors, 0 collisions, 888 interface resets
     0 output buffer failures, 0 output buffers swapped out
     474 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up
******************************************************
I have the serial up and protocol up (It´s the protocol between the links)
When the protocol down, I don´t receive this information.
Do you understand ?

Thank you.
Hugo

-----Original Message-----
From: nagios-users-admin at lists.sourceforge.net
[mailto:nagios-users-admin at lists.sourceforge.net]On Behalf Of Subhendu
Ghosh
Sent: quinta-feira, 25 de março de 2004 21:01
To: Hugo Rebello
Cc: Nagios Users (E-mail)
Subject: RE: [Nagios-users] problem with router monitor


On Thu, 25 Mar 2004, Hugo Rebello wrote:

> I don´t known, How this check can I monitor if the protocol is up or not ?
> About this check_ifoperstatus, could you tell me what sintaxe should I use
?
> I don´t known what I put in --key and --descr option.
>

When you say "protocol" what exactly do you mean?

Routers have:
physical interfaces
logical links
routing process
CPU utilization
Memory usage

--
-sg



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=ick
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting
any issue.
::: Messages without supporting info will risk being sent to /dev/null



-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id70&alloc_id638&op=click
_______________________________________________
Nagios-users mailing list
Nagios-users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nagios-users
::: Please include Nagios version, plugin version (-v) and OS when reporting any issue. 
::: Messages without supporting info will risk being sent to /dev/null