plugins
Yiannis Zimianitis
yiannis.zimianitis at sssltd.co.uk
Mon Mar 1 18:38:49 CET 2004
That's fine. That works and I implemented it. It refers to the CPU load but
my question was about the link utilization
Thanks yiannis.
-----Original Message-----
From: Platt, Nicholas [mailto:Nick.Platt at myflorida.com]
Sent: 01 March 2004 16:18
To: 'Yiannis Zimianitis'
Cc: 'nagios-users at lists.sourceforge.net'
Subject: RE: [Nagios-users] plugins
>From the PLUGINS directory, this is how you do it manually:
cd /usr/lib/nagios/plugins
[root at enms plugins]# ./check_snmp -H 192.168.24.1 -o .1.3.6.1.4.1.9.2.1.56.0
-C [CommunityString]
SNMP OK - 2
It worked from me!
>From the services file, you must configure the
/usr/local/nagios/etc/checkcommands.cfg file match the same arguments:
# 'check_snmp' command definition
define command{
command_name check_snmp
command_line $USER1$/check_snmp -H $HOSTADDRESS$ -o $ARG1$ -w
$ARG2$ -c $ARG3$ -P 1 -C $ARG4$
}
You then can configure the /usr/local/nagios/etc/services.cfg
define service{
use generic-service ; Name of
service template to use
host_name TestRouter
service_description Check CPU
is_volatile 0
check_period 24x7
max_check_attempts 3
normal_check_interval 1
retry_check_interval 1
contact_groups network-admins
notification_interval 60
notification_period 24x7
notification_options c,u,r
check_command check_snmp!
..1.3.6.1.4.1.9.2.1.56.0!70!90!CommunityString
-----Original Message-----
From: Yiannis Zimianitis [mailto:yiannis.zimianitis at sssltd.co.uk]
Sent: Monday, March 01, 2004 9:12 AM
To: 'Goldberg Alain (IT)'; Yiannis Zimianitis;
nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] plugins
It doesn't work I am afraid. The OID does not exist. Or better it does exist
but its not the only one. Each interface has ifInOctets and ifOutOctets and
when I tried to set the warning and critical limits always comes up with
critical
Thanks very much
Any more ideas?
-----Original Message-----
From: Goldberg Alain (IT) [mailto:alain at towersemi.com]
Sent: 29 February 2004 06:58
To: Yiannis Zimianitis; nagios-users at lists.sourceforge.net
Subject: RE: [Nagios-users] plugins
I have this in checkcommands.cfg
define command {
command_name check_snmpif
command_line $USER1$/check_snmp -H
$HOSTADDRESS$ -o $ARG1$ -m IF-MIB
}
the check_snmpif in this format spares a lot of MIB parsing.
and this in servicves.cfg:
check_command check_snmpif!enterprises.9.2.1.58.0 -w 1:50
-c 1:70
will warn above 50% and critical above 70%
____________________________________________________________________________
____________________________________________________________________________
_________
Alain Goldberg - Network manager - CCDA/CCNA AGG-RIPE - Tower
Semiconductors LTD. Tel : 972-4-6506003 Fax : 972-4-6547788 Cell:
972-64-209662
____________________________________________________________________________
____________________________________________________________________________
_________
_____
From: Yiannis Zimianitis [mailto:yiannis.zimianitis at sssltd.co.uk]
Sent: Thursday, February 26, 2004 11:44 AM
To: nagios-users at lists.sourceforge.net
Subject: [Nagios-users] plugins
I am after some plugins or any ideas on how to monitor cpu load on cisco
routers. Also utilization on the links (serial - fastethernet etc)
Thanks Yiannis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.monitoring-lists.org/archive/users/attachments/20040301/78d64147/attachment.html>
More information about the Users
mailing list