NRPE Issue

[Justin]

The config said if I was running under xinetd or inetd it did not matter.
But I changed the line anyways and still the same problem..

Justin Wedeking

----- Original Message -----
From: "Showkilr" <sysadmin at showkilr.com>
To: "Justin" <justin at pvamu.edu>
Cc: <nagios-users at lists.sourceforge.net>
Sent: Friday, January 10, 2003 12:06 AM
Subject: Re: [Nagios-users] NRPE Issue


> sounds like the allowed_hosts is set to the loopback which is default
> for security reasons.
>
> On the remote machine where nrpe is running look in the config file
> nrpe.cfg
>
> allowed_hosts=127.0.0.1
>
> change to
>
> allowed_hosts=127.0.0.1,<NAGIOS SERVER IP>
>
> restart nrpe
>
> Showkilr
>
> On Thu, 2003-01-09 at 23:38, Justin wrote:
> > I am stumped on this one.  I looked through the archives and could not
find a similar problem.  I am sure it is a fairly easy fix, something I
might be missing.  Thanks
> >
> >
> >
> > ./check_nrpe -H 129.208.56.12 -p 5666 -c check_users
> > CHECK_NRPE: Error receiving data from host.
> >
> >
> >
> > Justin Wedeking
> >
> >
>
>



-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com