help: statusmap.cgi trend.cgi don't display images

Potter, G M (Greg) GPotter at MarathonOil.com
Thu Dec 5 22:21:17 CET 2002


Well I have made several de-bugging changes to statusmap.cgi, getcgi.c, gd_gd.c and gd_gd2.c to try and determine where teh SEGFAULT is coming from, mostly to to avail.  I also upgraded to gd-2.0.8 and now my status maps work on Solaris 7.  Go figure.

Greg

> -----Original Message-----
> From: Potter, G M (Greg) 
> Sent: Tuesday, December 03, 2002 8:16 AM
> To: Nagios-users (E-mail)
> Subject: FW: [Nagios-users] help: statusmap.cgi trend.cgi 
> don't display
> images
> 
> 
> I have the same problem under Solaris 7 with statusmap.  I 
> just ran a truss process and find the statusmap.cgi gives the 
> following error as it is running.  I don't know if anyone on 
> the list is familiar with this problem, but perhaps it is a 
> known bug.  Any Ideas?
> 
> Greg Potter
> 
> partial output from: truss -aef -w1 -o /tmp/httpd.txt 
> /usr/local/apache/bin/httpd
> 
> 22890:  fstat64(3, 0xFFBEEFA8)                          = 0
> 22890:  ioctl(3, TCGETA, 0xFFBEEF34)                    Err#25 ENOTTY
> 22890:  read(3, "89 P N G\r\n1A\n\0\0\0\r".., 8192)     = 1344
> 22890:  brk(0x00092CA8)                                 = 0
> 22890:  brk(0x00096CA8)                                 = 0
> 22890:  brk(0x00096CA8)                                 = 0
> 22890:  brk(0x0009ECA8)                                 = 0
> 22890:  brk(0x0009ECA8)                                 = 0
> 22890:  brk(0x000A0CA8)                                 = 0
> 22890:  llseek(3, 0, SEEK_CUR)                          = 1344
> 22890:  close(3)                                        = 0
> 22890:      Incurred fault #6, FLTBOUNDS  %pc = 0xFF3583E0
> 22890:        siginfo: SIGSEGV SEGV_MAPERR addr=0x03BEEF94
> 22890:      Received signal #11, SIGSEGV [default]
> 22890:        siginfo: SIGSEGV SEGV_MAPERR addr=0x03BEEF94
> 22890:          *** process killed ***
> 
> > -----Original Message-----
> > From: Maxik [mailto:maxik at skatvis.lv]
> > Sent: Monday, December 02, 2002 5:24 PM
> > To: nagios-users at lists.sourceforge.net
> > Subject: [Nagios-users] help: statusmap.cgi trend.cgi don't display
> > images
> > 
> > 
> > Hello nagios-users,
> > 
> >   Libs instaled, compilation ok including GD lib (no
> >   errors,warnings).But I still cann't see image. I see only white
> >   square with red cross.What the problem ?
> > 
> > -- 
> > Best regards,
> >  Maxik                          mailto:maxik at skatvis.lv
> > 
> > 
> > 
> > -------------------------------------------------------
> > This SF.net email is sponsored by: Get the new Palm Tungsten T 
> > handheld. Power & Color in a compact size! 
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
> > _______________________________________________
> > Nagios-users mailing list
> > Nagios-users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/nagios-users
> > 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: Get the new Palm Tungsten T 
> handheld. Power & Color in a compact size! 
> http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
> _______________________________________________
> Nagios-users mailing list
> Nagios-users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/nagios-users
> 


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf




More information about the Users mailing list